Other
“The chess robot uses an algorithm of Micro-Max Chess Source found on the link below: http://home.hccnet.nl/h.g.muller/max-src2.html Supplies: 1 x Arduino Mega 1 x AZDelivery LCD1602 Display Keypad Shield HD44780 1602 1 x …
“The project was conducted as a part of the Computational Design and Digital Fabrication Seminar in the International Master of Science Programme: ITECH Introduction Physical Twin is an artistic robot which enjoys painting with the collaboration of humans. Integrating the …
“3D printed robot arm running on Arduino, contributed and supported by an active community. This 3D printed robot arm featured in 20sffactory is largely based on the popular design by Florin Tobler shared on Thingiverse. His open source design kicks …
“6-axis robot arm built with hacked servos and 3D-printed parts demonstrating smooth inverse kinematic movements. This is a very long project in the making for me. You could say that it started when I ordered six endless servos in middle …
“I have always been intrigued by robots, especially the kind that attempts to mimic human actions. This interest led me to try to design and develop a robotic biped that could imitate human walking and running. In this Instructable, I …
“This project describes the development of a fully functional animatronic prototype. It is implemented from scratch and it aims to be a guide for the development of future more complex animatronic robots. The system is based on an Arduino microcontroller …
“A Fully 3D Printed Arduino Robot Arm Designed for Hobby and STEM We want to build STEM kits that get kids excited about technology. So far we have created and launched nearly 10 kits. And now we want to improve …
“Control arm robot by smartphone via bluetooth HC-05 Usually robot can move by it self, but sometimes we need to control it. In this project I will control arm robot using smartphone. Arm robot there is a servo motor …
“Arduino 2 / 3 axis robotic arm with a robotic claw gripper. I made this project for those who don’t want to, for some reasons, buy a robotic arm from the store. The reason I started this project is that …
“There is no good reason for this to exist. There is however a festering reason. A couple of years ago, LVL1 Hackerspace hosted a Hack-a-thon for useless and/or impractical devices. With only 48 hours, this was outside the scope …