Content for 28BYJ-48

28BYJ-48

The 28BYJ-48 stepper motor is widely used to control a myriad of common devices we see every day. From blinds, car side mirror tilts and DVD players to security cameras and precise control machines, stepper motors are closer to us than we actually think.

Hollow Clock 4

“New version of the Hollow Clock is released. Contrary to the former version (Hollow Clock 3), the angle of the hour hand is controlled not mechanically but magnetically. Very easy to adjust the time. Supplies: - Three 8mm x 3mm neodymium …

Where’sLy Clock Project

“This project contains all the work I have done so far on creating a working GPS driven clock that emulates the Magical Clock from the Harry Potter films. I spent months on this and you are free to download the …

Cyclotron Clock

“3D Printed ESP32 WROOM 32D Perpetual Timepiece Using a wooden base, 3D printed parts and an ESP32 WROOM 32D module to display the time on four 28BYJ-48 Stepper Motor driven “perpetual rotating” digits. Time is stored on a RTC …

Automatic Pill or Medication Dispenser

“I created this pill or medication dispenser because my wife has to take several tablets in the morning and evening and was getting confused with which tablets she had taken and therefore not always taking the right medication at the …

WiFi Sync Clock 2

“Two hand analog clock with automatic time adjustment using NTP via WiFi. Contrary to the formerWiFi Sync Clock, this clock works normally with monotonic CW rotation (except origin alignment once a day). - It resets the position of hands once a …

Project  Holo Clock

Holo Clock

“3D printed and run by a single stepper motor, this unique clock’s hands float in a hollow frame. The changes that I made were: - Use of a cheap 28BYJ-48 stepper motor - New electronics based around a ATtiny1614 microprocessor …

Satellite Tracker W/ Green Laser Pointer

“This an adaptation of Alex Changs Satellite Tracker. This a portable version and can be used with either stand alone post or it can be mounted on a tripod. This version incorporates is a sturdier platform in order to support …

Door lock system with Arduino and RFID Module!

“Hey! This project shows how to make a door lock system, using Arduino, RFID Module, OLED Display and Stepper Motor. Hello! On this project, I’ll show how to make a door lock system using RFID module, stepper motor and …

3D Printed Timelapse/3D Scanning Turntable

“An affordable Arduino Turntable designed for Time lapse photography. Changing the gearing and code it can also be used for Photogrammetry/3D scanning or Video. The turntable operates on the move shoot move principle in the Timelapse and Photogrammetry modes …

DIY Motorized WiFi Roller Blind - ESP8266 & Blynk

“In this project we will see how to control a roller blind via a smartphone application. The reason why I realized the project was to use a roller blind to change the background in the video footage and to be …