Content for Clock

Clock

A clock is an instrument used to measure, keep, and indicate time. The clock is one of the oldest human inventions, meeting the need to measure intervals of time shorter than the natural units: the day, the lunar month, and the year. Devices operating on several physical processes have been used over the millennia.

Description Source

Project  A Big Self-Setting Clock

A Big Self-Setting Clock

“Use an ESP32, an RTC, and a flexible LED Matrix panel to build this large clock that gets NTP time from the Internet. I’ve built several clocks. I like the ones that connect to the Internet and set themselves …

Project  esp32-dali-clock

esp32-dali-clock

“This is an ESP32 recreation of the “Dali” digital clock where the digits “melt” into one another. Watch a full demonstration on YouTube The Dali clock was first written in 1979 by Steve Capps for the Xerox Alto and later …

Project  Lighted 3D Moon Phase Clock

Lighted 3D Moon Phase Clock

“In this Instructable, I will describe the design and build of a clock that shows the current phase of the moon in a lit 3D printed moon model. This project started this summer when I began to think about a …

Project  Folding Clock

Folding Clock

“An interesting 3D printed clock that folds out flat or back on top of itself. Recently I build a Cube clock that showed the time in the same orientation no matter what orientation the clock itself was in. This was …

Project  Retro Digital Clock W/ Raspberry Pi Zero

Retro Digital Clock W/ Raspberry Pi Zero

“This project combines the amazing retro look, with the almost endless possibilities with Raspberry Pi and IoT. In this guide I will show exactly how I designed and put together this 3D printed Raspberry Pi Zero retro digital clock. By …

Project  Digital Clock with IR Remote Control using Arduino Nano

Digital Clock with IR Remote Control using Arduino Nano

“Digital Clock With Hour/Minute/Second/ Temperature display and features Alarm/snooze/Hour Chime with a full function IR remote Control. I have earlier published a Digital Clock project, and that was my first project on Arduino. That project has …

Project  One MAN Clock

One MAN Clock

“We old timers know this as a MAN. Monsanto and Fairchild may have been first to use the acronym MAN for multi-segment alpha numeric led chip. The 7 segment display you often see. I see some interesting ways to produce …

Project  All in one clock

All in one clock

“Clock alarm temprture senseor and timer, all in one device using an arduino uno and RTC In this project we will make an arduino clock alarm with timer and a temperature sensor.”

Project  3D Printed Holo Clock With Arduino

3D Printed Holo Clock With Arduino

“This project is a 3D printed clock powered by a stepper motor and is controlled by an Arduino Uno. It was designed in OnShape over the course of a month. It keeps time very precisely and only needs to be …

Project  Glowing Air-Bubble Clock in Water

Glowing Air-Bubble Clock in Water

““Glowing Air-Bubble Clock in Water” displays the time and some graphics by illuminated air-bubbles in water. - font: 8 bits width - display area: roughly 200mm height x 90mm width. - The viscosity of water is low and the bubbles rise too fast …