Blynk

Blynk is a Platform with iOS and Android apps to control Arduino, Raspberry Pi and the likes over the Internet. It's a digital dashboard where you can build a graphic interface for your project by simply dragging and dropping widgets.

Main Content

Smart Irrigation

“Automatic irrigation of 3 plants of Pothos, through the use of Wemos (ESP8266). The project aimed to wet the plants of Epipremnum aureum, commonly known as Pothos or Scindapsus aureus. These plants are found in the Prototyping laboratory of school …

Long term dust monitoring using GP2Y1014AU0F and Blynk

“Monitor the surrounding dust and large particle (>0.5µm) for long time using Blynk IOT and plot the data for further research. In this project I have made a IOT based Dust density monitor which can measure the surrounding dust …

DIY heart rate monitor and pulse oximeter

“DIY heart rate monitor and pulse oximeter using MAX30100 Pulse Oximeter Heart Rate Sensor Module. Story India is badly hit by the second wave of COVID 19. There’s a shortage of pulse oximeters. I and my family got infected …

IOT based Power and Energy meter

“This is a IOT based Power and Energy Meter with Blynk iot platform. Story In this project I’ll show you how to make a IOT based power and energy meter which can measure current, power, energy consumption using INA219 …

Blynk - creating a local server with a Raspberry Pi

“Blynk, is it the savour of microprocessors everywhere? Well at first look this seems to show promise, so let’s take it for a spin and see. While looking for a unique way to control a two-stage green-house, I came …

IOT Based Fertilizer System for Smart Agriculture

“Real-time visibility and control of water, Nitrogen-Phosphorus-Potassium - from any where an Internet of Things (IoT) based system. My country India has been badly affected by climate change due to heavy deforestation. So many campaigns arose planting more trees. However, to …

Blynk Home Automation with Multiple ESP32 & NodeMCU Network

“Make IoT-based Smart Home Automation using Multiple ESP32 & NodeMCU network to control all the home appliances from the Switches & Blynk App In this IoT project, I have shown how to make IoT-based Smart Home Automation using Multiple NodeMCU ESP32 network …

How to connect RPi Pico to WiFi and send phone notifications

“We show how to connect Pico to WiFi while maintaining low power and running it directly on AAA batteries In this project we show how to connect Raspberry Pi Picoto WiFi by using the Cricket WiFi moduleand send an alert …

Remote On/Off Switch for Blynk Relay - using ThingsonEdge Cricket, Node Red, and MQTT

“Like most makers, my home is automated - not with off-the-shelf IoT devices, but with home-built switches and relays, Raspberry Pis and ESPs. My first remote switches - all controlled through ESP8266 01s- were mostly built with Blynk. I’d contentedly call …

School Bell Ring

“This project shows you how to automate and control from a mobile phone a school bell ring using a ESP8266 module with a relay and Blynk The main features could be the following: Access to a network wifi to control …