Content for Water Level Sensor

Water Level Sensor

This is simple and small portable water level/water droplet identification, detection sensor water that have high cost performance. Complete water yield and analog conversion, the output value apply to your custom function. It is low power consumption and high sensitivity. It can make better performance with Arduino 328 controller and sensor relay shield. Water Sensor water level sensor is an easy-to-use, cost-effective high level/drop recognition sensor, which is obtained by having a series of parallel wires exposed traces measured droplets/water volume in order to determine the water level. Easy to complete water to analog signal conversion and output analog values can be directly read Arduino development board to achieve the level alarm effect.

AmebaD and Arduino humidity monitor for house plants

“Your plants die when you are on the road, this practice will help you create a Wifi monitor to keep an eye on them. In this practice a solenoid valve is controlled while the temperature and humidity of a plant …

DIY Smart Plant

“Take care of your plant automatically Having plants require to take care of them and give them water everyday. But when you have to work around the clock, you don’t have the time or just can forget to water …

DIY Automated Watering System

“In this project I will be showing you how to create an automated watering system. My system is made for my greenhouse, but you can use the general principle for pretty much everything and everywhere. The system uses LoRa for …

JAL Project- Household Water Usage Tracker

“This Water Monitoring System would enable a society or houses to monitor, limit and record their water usage Water is the most important and critical part of our life. This clear, amorphous liquid is key to our life. Water Conservation …

Solar Scare Mosquito 2.0

“An open-source IoT platform to monitor and prevent epidemics such as Malaria, Dengue and the Zika Virus. This solar-powered device eliminates mosquito larvae in stagnant water bodies such as water tanks, swamps and micro-dams. The system allows mosquitoes to lay …

Automated Hydroponic System

“An automated hydroponic system for growing strawberries using Grafana and InfluxDB. Description I’ve been interested in hydroponics for a while, so I built this as my thesis project. Building it was a fun and challenging process and, to my …

Automated Garden System Built on Raspberry Pi for Outdoors or Indoors - MudPi

“Do you like gardening but can’t find the time to maintain it? Perhaps you have some houseplants that are looking a little thirsty or looking for a way to automate your hydroponics? In this project we will solve those …

GardenPi powered by Neptune. py

“Highly scalable and powerful irrigation / hydroponic & aquaponic control system managing up to 32 zones with automation and sensors. Overview & Theory of Operation GardenPi, powered by Neptune.py is designed to manage, monitor, and control a series or sprinkler valves and …

Project  Plant’m

Plant’m

“As most do, I love having plants around the house. Unfortunately, they almost always end up dying within a couple of weeks. So when at the end of my first year as a student at MCT at Howest I was …

The Irrigator: AI-powered irrigation robot

“An autonomous, sustainable robot that takes care of plants. Built from scratch, the Irrigator runs TFLite object detection on Jetson Nano. The Irrigator: AI-powered irrigation robot The Irrigator is an autonomous, sustainable, smart robot that takes care of indoor …