Other

“A microcontroller project to be used in wastewater treatment plant for uses like irrigation and purification Temperature Sensor (Bithal): The sensor was used to to monitor and control temperature levels of the unfiltered water in the sewage treatment which then …

“Will guide you to build an IOT Based Water Quality Monitoring system. Story In the 21st century, there were lots of inventions, but at the same time when pollution, global warming, and so on are being formed, because of this …

“Take deep algae images w/ a borescope, collect water quality data, train a model, and get informed of the results over WhatsApp via Notecard In technical terms, algae can refer to different types of aquatic photosynthetic organisms, both macroscopic multicellular …

“Via MKR GSM 1400, collate water quality data from resources over GPRS to train a Neuton model, run the model, and transmit results via SMS. In this project, I focused on developing an AI-driven budget-friendly device to collect water …

“Via MKR GSM 1400, collate water quality data from resources over GPRS to train a Neuton model, run the model, and transmit results via SMS. In this project, I focused on developing an AI-driven budget-friendly device to collect water …

“An automated system for growing plants in a hydroponic set up. Reduce water usage by automatically recycling and amending your water. Hydroponics is the practice of growing plants in water instead of soil. I have long wanted to build a …

“Marine species are extremely sensitive to changes in environmental conditions. AquaMon IoT device and app helps your fishes to grow better. Introduction Do you love sea creatures? I don’t think I would find a single person who would not …

“Sense the water pH of a hydroponic plant with Arduino Nano 33 BLE Sense and determine if it’s right using an Edge Impulse trained model. Introduction I’ve had a hydroponic plant for two years now, and everything went …

“Build a monitoring system that will measure your pH and DO levels. The ideal pH range for most hydroponic systems is between 5.5 and 6.5. pH is important because it affects the availability and absorption of the elements …

“An automated hydroponic system for growing strawberries using Grafana and InfluxDB. Description I’ve been interested in hydroponics for a while, so I built this as my thesis project. Building it was a fun and challenging process and, to my …