Arduino Mega

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega 2560 board is compatible with most shields designed for the Uno and the former boards Duemilanove or Diecimila.

Main Content

How to Control DC Motors Rotation ?

“Working on a autonomous robot, I needed to be able to control simultaneously two DC motors moves. I already designed a system in july 2016 that runs rather well but I needed to improve speed measurement precision. To do so …

3D Printed Arduino Based Robotic Arm

“One year, I received a robotic arm kit for Christmas made out of acrylic parts and controlled with an Arduino. I put it together and uploaded the code to the Arduino board, only to be disappointed with its performance. I …

Autonomous UV Robot with SLAM

“The affordable autonomous robot provides localization and mapping facilities and safely navigate the robot through the environment. As we face a worldwide healthcare crisis caused by COVID-19, there’s a large need for disinfection. This tutorial can be followed …

TMD-1: a Turing Machine Demonstrator

“You can find numerous Turing machine implementations on the internet that are absolutely stunning. The makers of these devices often set lofty goals for themselves, like “mechanical only solutions”, which they met and exceeded with aplomb. In my humble opinion …

How to Built a Chess Robot With Arduino Mega

“The chess robot uses an algorithm of Micro-Max Chess Source found on the link below: http://home.hccnet.nl/h.g.muller/max-src2.html Supplies: 1 x Arduino Mega 1 x AZDelivery LCD1602 Display Keypad Shield HD44780 1602 1 x …

Rainbow Audio-Reactive Flute

“Hello! In this instructable I will be showing you the process of creating this audio-reactive, rainbow flute (known as a Bansuri). The flute has RGB LEDS inside and will change it’s color based on the note played. Note that …

8 x 8 x 8 LED Cube Powered by an Arduino Mega

“This cube is easy to build with no circuit board and minimum external components; and it comes with a lot of animations and effects. This is the third and final project in a series to see how much LED cube …

Physical Twin: an Interactive Remote Painting Device

“The project was conducted as a part of the Computational Design and Digital Fabrication Seminar in the International Master of Science Programme: ITECH Introduction Physical Twin is an artistic robot which enjoys painting with the collaboration of humans. Integrating the …

3D Printed Belt Driven Robot Arm

“3D printed robot arm running on Arduino, contributed and supported by an active community. This 3D printed robot arm featured in 20sffactory is largely based on the popular design by Florin Tobler shared on Thingiverse. His open source design kicks …

Iconic CASIO F-91W Wall/Desk Size

“The Casio F-91W watch ,my favorite classic digital watch and loved by thousands around the world is becoming an iconic retro fashion. So, why do not to Super-Size it with all the functionality ?! Supplies:- HMI 7” (Nextion) -Nextion IO adapter …