Content for DDS

DDS

Direct digital synthesis (DDS) is a method employed by frequency synthesizers used for creating arbitrary waveforms from a single, fixed-frequency reference clock. DDS is used in applications such as signal generation, local oscillators in communication systems, function generators, mixers, modulators, sound synthesizers and as part of a digital phase-locked loop.

Description Source

Project  RF Signal Generator AD9912 DDS 500MHz Arduino Shield

RF Signal Generator AD9912 DDS 500MHz Arduino Shield

“The way to create Low Noise Oscillatror Sinus Wave up 500 MHz, CMOS up 150MHZ, HSTL 1GHz based on DDS from Analog Devices - AD9912 Why did we choose to build a Direct Digital Synthesizer (DDS) based on the AD9912 by …

Project  How to Use Arduino DDS Frequency Signal Generator AD9850

How to Use Arduino DDS Frequency Signal Generator AD9850

“In this Tutorial we will learn how to make a Frequency Signal Generator using a AD9850 module and Arduino. Watch the Video! Note: I managed to get frequency up to +50MHz but the signal quality gets worse with the higher …

Project  HF Antenna Analyser With Arduino and DDS Module

HF Antenna Analyser With Arduino and DDS Module

“In this Instructable I’ll show you how I built a low-cost antenna analyser which can measure an antenna and display its VSWR over any or all of the HF frequency bands. It will find the minimum VSWR and corresponding …

Project  Build your own cheap antenna analyser

Build your own cheap antenna analyser

“Ham radio is the use of radio frequency spectrum for purposes of non-commercial exchange of messages, wireless experimentation, self-training, etc. Developing a ham radio project may requires using an antenna analyser, a device that is used for measuring input frequency …

Project  10 Resister Arduino Waveform Generator

10 Resister Arduino Waveform Generator

“The circuit implements a 6-Bit Digital to Analog Converter (DAC) using a 8-4-2-1 Resistor combination. Arduino Uno Output pins 13 to 9 form the 6-Bits PB5 to PB0.”