DRV8833

The DRV8833 device provides a dual bridge motor driver solution for toys, printers, and other mechatronic applications. The device has two H-bridge drivers, and can drive two DC brush motors, a bipolar stepper motor, solenoids, or other inductive loads. The output driver block of each H-bridge consists of N-channel power MOSFETs configured as an H-bridge to drive the motor windings. Each H-bridge includes circuitry to regulate or limit the winding current.

Description Source

See alsoH bridge

Main Content

Project  Advanced Line Following Robot

Advanced Line Following Robot

“This is an advanced line following robot based on Teensy 3.6 and QTRX line sensor that I have built and have been working on for quite some time. There are some major improvements in the design and performance from …

Project  Blimp DIY

Blimp DIY

“Build your own DIY remote-controlled blimp for flying for sport or for commercial use. Story This is a showcase of a DIY Blimp project. I created an indoor blimp demo that leverages TI LaunchPads and BoosterPacks. I wanted to combine …

Project  ESP32 WiFi Robot

ESP32 WiFi Robot

“3D Printed ESP32 Powered Video Streaming Robot The ESP32 WiFi robot is a shrunken-down version of the ZeroBot (https://hackaday.io/project/25092). Instead of a Raspberry Pi, it is powered by the similarly popular ESP32. Despite its lower processing …

Project  Tiny Micro:bit Robot - Part 1

Tiny Micro:bit Robot - Part 1

“I have always thought small robots were great and creating one with the cost effective Microbit would be ideal. I wanted to create a robot that didnt use a ready made IO boards like I have used in the past …

Project  Mini WiFi/BLE 4WD robot platform

Mini WiFi/BLE 4WD robot platform

“A compact & modular WiFi/BLE controlled 4WD robot platform with all required sensors The WiFi capabilities of the new micros as ESP8266 or ESP32 invite to create to build easy to control robots. The aim of this platform is to …