Content for Teensy

Teensy

The Teensy is a complete USB-based microcontroller development system, in a very small footprint, capable of implementing many types of projects. All programming is done via the USB port.

kitchen timer

“Here’s the bill of materials I ended up with: Teensy 2.0 Adafruit 16x9 Charlieplexed PWM LED Matrix Driver LED Charlieplexed Matrix - 9x16 LEDs - Warm White Rotary Encoder Solid Machined Metal Knob PowerBoost 500 Charger Lithium Ion Polymer Battery …

DIY SMU: Source Measure Unit

“As a lifelong analog EE, I have built and used many DC power supplies starting with an LM309 5V regulator in the late 60’s. Then on to uA723s, various 3 terminal linears, and many switchers. At Analogic in the …

Project  Overleap

Overleap

“Overleap is an open-source 2 DOF robotic leg that can jump and hop in a circle. Overview Overleap is an open-source low-cost 3D printed dynamic robotic leg designed be as accessible as possible. Overleap can be assembled with a 3D …

DIY Arduboy GT

“Homemade Arduboy using custom PCB, modules and all through hole parts that stands out. 1.54” OLED display, silent buttons and RTC FTW For the Arduboy contest I took the opportunity to design a custom PCB for a homemade Arduboy …

Datalogger System for Formula Student

“Background: Formula Student the world most established educational engineering competition which uses motorsport to inspire students. Backed by industry and high-profile engineers such as Patron, Ross Brawn OBE, the competition aims to develop enterprising and innovative young engineers and encourage …

LoRa Controlled Garage Door

“This project replaces the WiFi Garage Door control base on an ESP2866 with a radio/LoRa version for greater range and includes a push button long range radio/LoRa remote for use from the car. Originally this project attempted to …

Big Wheel - Premiere Pro Video Deck

“Keyboards are the ultimate controller for video games (fight me, console peasants) but Premiere Pro demands a power level for which 104 buttons is not enough. We must Super Saiyan into a new form - we need KNOBS. This project takes …

Advanced Line Following Robot

“This is an advanced line following robot based on Teensy 3.6 and QTRX line sensor that I have built and have been working on for quite some time. There are some major improvements in the design and performance from …

Animatronic Tentacle

“A springless animatronic tentacle mechanism that can move in all directions and is strong enough to pick things up. Why because I can. When has a lack of good reasons ever stopped anyone. Also, the original spark for this project …

Automated Pothole Detection

“An accelerometer measure bumps/potholes. These are geo-tagged with a GPS-unit and saved to an uSD card. Visualization via Google Maps. I teach an Internet of Things workforce development bootcamp (http://deepdivecoding.com/iot) at Central New Mexico Community …