Other
“The Power Analyzer is a programmable electronic constant current dummy load with two high side voltage and current sensors for an automatic analysis of power supplys, DC/DC converters, voltage regulators, batteries, chargers, power consumers and others. The device can …
“Hi everyone! In this instructable I will show you how to build your own Arduino powered MIDI controller. MIDI stands for Musical Instrument Digital Interface and it is a protocol that allows computers, musical instruments and other hardware to communicate …
“Hi All! This is my submission for the 2020 First Time Author Contest! If you like this project, I’d greatly appreciate your vote :) Thanks! This instructable will guide you through the process for building a clock made of clocks …
“The COVID-19 pandemic has spread to most parts of the world like a wildfire. One of the most telling symptoms of the infection includes fever, dry cough, and breathlessness. Now, 95% of cases of the virus have mild symptoms …
“I’ve always wanted to make my own Bluetooth speaker from scratch and with my new found free time I decided to accelerate that want into a reality! The board I designed revolves around the XS3868 Bluetooth module and the …
“If you have a couple of hours to spare during quarantine, this DIY Neuralyzer can be a fun introductory project into the world of electronics and 3D printing. As a plus, it can make a family member or friend laugh …
“This project describes the development of a fully functional animatronic prototype. It is implemented from scratch and it aims to be a guide for the development of future more complex animatronic robots. The system is based on an Arduino microcontroller …
“When I build my previous mini oscilloscope I wanted to see how well I could make my smallest ARM microcontroller a STM32F030 (F030) perform, and it did a nice job. In one of the comments it was suggested that a …
“ESP-01 ESP8266 can be used as a stand-alone device to control a RGB led cube 4x4x4. Today, I’d like to share how ESP-01 ESP8266 can be used as a stand-alone device to control a RGB led cube …
“UV-C / heat, Arduino-controlled, face-mask disinfecting device for Coronavirus (SARS-CoV-2). #COVID19DetectProtect FFP1 and FFP2 masks are indispensable protective elements during epidemics. They are intended for single-use, but during a crisis the re-usage is inevitable and disinfection mechanisms are required …