Content for ATtiny814


The ATtiny214/414/814 are members of the tinyAVR® 1-series of microcontrollers, using the AVR® processor with hardware multiplier, running at up to 20 MHz, with 2/4/8 KB Flash, 128/256/512 bytes of SRAM, and 64/128 bytes of EEPROM in a 14-pin package. The tinyAVR® 1-series uses the latest technologies with a flexible, low-power architecture including Event System and SleepWalking, accurate analog features, and Core Independent Peripherals. Capacitive touch interfaces with driven shield are supported with the integrated QTouch® peripheral touch controller.

ATtiny x04/x14/x24 Development Board v2

“Development board for ATtiny x04/x14/x24 series with USB to serial converter, integrated SerialUPDI programmer and Arduino IDE support.”

USB PD Adapter

“The USB PD Adapter is a USB Power Delivery trigger and monitoring board that enables you to use almost any USB Type-C PD power supply to run your projects with different selectable voltages and high currents. Important values such as …

ATtiny814 Power Analyzer

“The Power Analyzer is a programmable electronic constant current dummy load with two high side voltage and current sensors for an automatic analysis of power supplys, DC/DC converters, voltage regulators, batteries, chargers, power consumers and others. The device can …