Other
“In this guide, you’ll learn how to create a unique clock that displays the time with the atomic numbers of elements on the periodic table. By illuminating specific elements on the table, time is represented in hours, minutes, and …
“A digital clock using sliding grids to show or hide the segments of the digits. Each minute the sliders move in a synchronized manner to show the current time. The clock is powered by an Arduino Mega and it uses …
“Let’s build a new Style clock using Arduino and PCB If you are a regular follower of mine, then you might have seen my clock-making tutorials. These are clocks of different types and styles that I have made. in …
“In this tutorial, I am going to show you guys how to create this Arduino based touchless concrete clock. When you mix creativity with electronics, it becomes a masterpiece. Producing something original and worthwhile leads to the creation of a …
“A late happy new year, everyone! Here’s another LED grid. The ones I built so far always used LED strips with either 60 or 30 LEDs/meter. And so does this one, it’s using 60 LEDs/meter, 90 …
“I recently came up with a new idea for an unconventional display by using a magnetic viewing film that changes color in a magnetic field. In contrast to some other magnet viewing films this one shows a variety of colors …
“Push a button to remember when your tea was brewed. Simple! Written for a Pimoroni Badger2040, with an RV3028 RTC board connected via I2C (on the QW/ST connector on the back of the Badger), and a couple of AAA …
“A practical-size, Back to the Future themed digital clock mimicking the “Present Time” portion of the DeLorean’s time circuit displays. Back to the Future time circuits are a bit over done around the internet, but my desk could really …
“Hardware - Raspberry Pi Pico - Precision RTC Module (DS3231) - Waveshare eink 3.7 Software MicroPython The software is written in MicroPython 1.19.1 - Download the MicroPython UF2. - Push and hold the BOOTSEL button and plug your Pico into the USB …
“This project makes use of a previous project Modular Display Element to make a digital clock, using four of the modules connected together and controlled by a Microbit and an RTC. Supplies: - Microbit V2 (preferred due to built in speaker …