Other
“Fully operational mini version of the IBM PS/2 Model 25 from 1987, recreated using a Raspberry Pi 4B as the computer. The original has an all-in-one design, which mimicked the popular original Macintosh. There are several variants, but the …
“BLE relay device for Home Assistant that, for the most of time is in a very low energy state and only a few seconds per minute is awake. The purpose of this project, was to develope a BLE relay device …
“A remote-driving intelligent robot car based on IoT oneM2M techniques Introduction In this project, we are going to build a remote-driving intelligent robot car using single-board computers combined with IoT oneM2M techniques.The car can be controlled by a remote …
“Hey everyone, what’s up? So here’s something super interesting and cool: SANDWICH DOT IO. It’s a Raspberry Pi system with onboard power, a dedicated cooling layer, and even RGB LEDs for aesthetics. This setup was created to …
“This SDK will convert and stack various Arduinos to/from a Raspberry Pi. Thus the name RasDuinoHat project was formed. The Seed to experimenting With so many different Arduino boards available and various SDK’s on the market, a challenge …
“Taking pictures and geeking out over cameras was one of my first hobbies starting with an old Olympus point and shoot, I then moved up to a DSLR upgrading as new and exciting technology became accessible to my summer job …
“Sensing the Water Tank with Machine Learning & Matter The Story Begins With.. It’s been a year since I was not active with the hackster.io community. Just came back from the break with this new and one of my …
“An open-source, low-cost, large-format 3D printer that can print directly from shredded plastic trash instead of filament The Trash Printer is an open-source large-format 3D printer that can print new and useful things directly out of shredded plastic trash. Polypropylene …
“An IoT shot pouring machine powered by a Raspberry Pi The JägerMachine is an IoT shot pouring machine powered by a Raspberry Pi 3B+. It features a full GUI that allows the user to configure the device, pour a shot …
“In this project I will be showing you how to use the Home Assistant software in order to create an intruder alarm system for your home. The system will basically detect if the door gets opened without permission and then …