Other
“Made a Raspberry Pi Pico powered DC 12V-5V FAN Driver So here’s something cool: a 5V to 12V DC motor driver based around a Raspberry Pi Pico Board and a couple of electronic components. The Raspberry Pi Pico is …
“Greetings, So this is the WEB Desk Lamp made from PCBs, a unique and innovative DIY project that combines electronics and home automation. The lamp can be controlled remotely through a web server, allowing users to turn it on and …
“A 7-inch display was added to the Sandwich Dot IO project in a revision to make it truly wireless and portable. The fan layer, raspberry pi carrier board, and battery bank layer are the three layers that make up this …
“A simple magnetic levitation toy built using a ATtiny1614 microprocessor This is my build of Magnet Levitation with Arduino by fellow Hackster jsirgado. This version differs in the following ways: - Replaced Arduino Nano with ATtiny1614 microprocessor - Added a 3D printed …
“Hey guys how you doing So here’s something revolutionary: a DIY Turntable Rotating Platform created entirely from scratch utilizing a unique PCB and 3D-printed parts. Because it spins, it is revolutionary. Was this a dad joke, perhaps? Without getting …
“Hey everyone, what’s up? So here’s something super interesting and cool: SANDWICH DOT IO. It’s a Raspberry Pi system with onboard power, a dedicated cooling layer, and even RGB LEDs for aesthetics. This setup was created to …
“What’s up, everyone? Here’s something REALLY HOT: a DIY mini PCB hotplate made entirely from scratch. The idea was to make a small and minimal reflow hotplate that could be used for SMT reflow work on small PCBs …
“A Square shaped Solar Light which completely made from scratch. The goal for making this was simple, I wanted to make an emergency light powerful enough for daily use. (To light up a certain area of my home during blackouts …