Content for IP5306

IP5306

DIY Thermometer with TTGO T Display and DS18B20 V2

“Version 2 of a previously made Thermometer project. Here’s something useful: A DIY thermometer made completely from scratch using a custom PCB and a couple of 3D-printed parts. The DS18B20 temperature sensor probe and the TTGO T-display board form …

CONE LAMP With XIAO

“Made a cone-shaped RGB Lamp from scratch, The lamp consists of WS2812 LEDs that are controlled by an XIAO MCU. Hello everyone, and here’s something flashy: a cone-shaped RGB Lamp built from scratch using custom 3D-printed parts and basic …

XIAO Room TEMP and HUMIDITY Meter

“Greetings and welcome back. So here’s something cool: a room temperature and humidity meter that measures current room temperature and humidity and displays the readings on an SSD1306 OLED Screen. AHT10 is being used here to get the Temperature …

Sandwich Dot IO

“Hey everyone, what’s up? So here’s something super interesting and cool: SANDWICH DOT IO. It’s a Raspberry Pi system with onboard power, a dedicated cooling layer, and even RGB LEDs for aesthetics. This setup was created to …