Other
“For my Mechatronics Class Project I decided to design and create an Automatic Wood Stove Thermostat using a WiFi enabled Arduino with a PID controller driving a Stepper motor to control the damper position on my Wood Stove. It has …
“I build my first CNC about a year ago and learned a lot from the process. As an engineer I’m always looking at ways to improve things, and my first machine was no exception. The process began with some …
“I designed a CNC Arduino Plant Watering machine for my local high school science and engineering fair. I ended up getting second place in the maths and engineering category, won $200 from the Missouri Society of Engineers, and was invited …
“Well, if you have decided to build yourself a polargraph, this is your instructable! A polargraph is a computer controlled drawing machine. Motors are fastened on the two upper corners of the drawing surface. They are equipped with gear pulleys …
“This instructable was created in fulfillment of the project requirement of the Makecourse at the University of South Florida (www.makecourse.com). This project is on automated window blinds that can be controlled from your phone via Bluetooth. The system …
“In optical microscopes, there is a fundamental trade-off between field-of-view and resolution: the finer the detail, the smaller the region imaged by the microscope. One way to overcome this limitation is to translate the sample and acquire images over a …
“Hello guys if you are electronics guy like me and making projects for learning and fun, so many time you need to cut some wire for the project, as feel so bored to always cut wires manually because I need …
“This is a quick and dirty way to get a whole bunch (up to 17) small stepper motors working off a single arduino, with no extra circuitry whatsoever. Why would you want to do that? Maybe you want to make …
“So this will be my first instructable, and I’m sure I’ll need to update things as I find issues with it. I’ll try and fix things as time allows and with feedback. Thanks! All the information I …
“When I got my first 3D printer I was extremely happy with all the new possibilities to create things but after some time I noticed the limitations of 3D printing. Plastic is easy to melt, sometimes it’s not mechanically …