Other
“This is a bot that follows black line. My goal was to make it as compact as possible and to use Infrared LED’s instead of Infrared modules. I have used BO motors, Arduino UNO, L298N driver and IR transmitter …
“This system informs us that whenever a door is opened on our website. This system utilizes IR sensors to detect the movement of the door. Story: As IoT is a very emerging and interactive field, we were very curious about …
“There are a bunch of remotes for controlling various devices and using them is a frustrating thing because every device has its own routine that is made by default and users have to go through the same routine to open …
“Suddenly, I got the idea to make a line follower robot without using a microcontroller. After that, I started researching this topic but can’t find any proper guidance. So I started simulating and building logic for each functionality, such …
“Hacking the PixMob infrared protocol to enable control of PixMob wristbands at home. PixMob bracelets are LED wristbands distributed to every member of the audience at large events which all light up in sync to create massive, distributed light shows …
“Hello all. A disclaimer right up front, I didn’t shrink the remotes and that’s not a photo of my remotes through a microscope. But what I did do was shrink them down to the buttons I use the …
“Develop a device which detects the level of fluid in the electrolyte bottle and capable of sending notification to the nurse station. Story In hospitals, ICU, CCU, NICU, OT, most of the departments have patients connected to an electrolyte bottle …
“If you are a TV technician this project cannot be missing among your repair tools. I made an infrared remote control with arduino nano that allows you to send 3SPEED and Factory codes (and many others to choose from!) To …
“This Tachometer very precise. it measures too fast or slow RPMs and it can be used to measure engine RPM or any thing. I am currently making an electric Bike, but the problem is that I wanted to measure the …
“IR Clone is an open-source infrared remote control signal analysis and generating tool. IR Clone is an open-source IR remote control analyzer tool. This utility can analyze any IR remote control that modulates the IR signal with a 38kHz carrier …