Content for IR Receiver

IR Receiver

An infrared receiver, or IR receiver, is hardware that sends information from an infrared remote control to another device by receiving and decoding signals. In general, the receiver outputs a code to uniquely identify the infrared signal that it receives.

Different Ways to Control a Robot

“This project will show you three different ways to control a robot with an ARDUINO UNO board. The robot has been built with pieces and motors of a VEX robotics construction set with a shield and an ARDUINO UNO microcontroller …

Honey I Shrunk the Remotes!

“Hello all. A disclaimer right up front, I didn’t shrink the remotes and that’s not a photo of my remotes through a microscope. But what I did do was shrink them down to the buttons I use the …

Intravenous Flow Controller & Monitor

“Develop a device which detects the level of fluid in the electrolyte bottle and capable of sending notification to the nurse station. Story In hospitals, ICU, CCU, NICU, OT, most of the departments have patients connected to an electrolyte bottle …

Arduino Text LCD Display & Receive Infrared Remote Code

“Use LCD Screen to Display Received Code through Remote on LCD and assign Different Character. ntroduction In this project I will show you how to Decode IR Remote Control Signals’ of any Remote using Arduino and Display Code on LCD …

Decode IR Remote Control Signals of any Remote Using Arduino

“In this project you will be going to decode the signal sent by any type of Remote to make Projects Introduction In this project I will show you how to Decode IR Remote Control Signals’ of any Remote using Arduino …

Samsung TV Remote Service

“If you are a TV technician this project cannot be missing among your repair tools. I made an infrared remote control with arduino nano that allows you to send 3SPEED and Factory codes (and many others to choose from!) To …

Talking alarm clock with 8x8x4 matrix display

“Wake to any of 100’s of MP3 messages from SDRAM. Scrolling display w/remote shows clearly w/o glasses. Temp too! This is my second Arduino build. Lots of fab issues have been resolved and this is more of …

Project  Tachometer

Tachometer

“This Tachometer very precise. it measures too fast or slow RPMs and it can be used to measure engine RPM or any thing. I am currently making an electric Bike, but the problem is that I wanted to measure the …

Infrared remote control clone utility

“IR Clone is an open-source infrared remote control signal analysis and generating tool. IR Clone is an open-source IR remote control analyzer tool. This utility can analyze any IR remote control that modulates the IR signal with a 38kHz carrier …

IR remote control Arduino based electric board

“Arduino based electric board controlling system, Can be controlled using any universal IR remote. good IR receiving range and support 12 CH. Hello guys, today we are going to make a remote-control universal switch on/off 3 channel circuit. Though …