Other
“Welcome to this Instructable, I’ve wanted to build one of these Labyrinth Games for some time now but rather than use the conventional method with the hand turn knobs, I wanted to use 2 of the small 28BYJ-48 …
“The goal here was two-fold; create something stylish that would look good when hung up on a wall, and ensure that all movements were as quiet as possible! I was inspired by some great existing projects that I have bookmarked …
“Hey! So this is a project I started April 8 2021, and since then, it has changed quite a bit. The basic idea was to make a clock shaped like a triangle. This morphed into a 3-hand clock with a …
“Weather station with remote outdoor sense, FM radio, blinkey lights and secret hidden compartment. Woodworker/ retired industrial automation engineer on steampunk kick. Have designed Rick & Morty gadgets and now want to take it to the next level. Bought one of …
“In fact, it is not a very precise clock, but a visually interesting device. It consists of a set of gears powered by a small stepper motor. Today I will show you how to make a 3D Printed Arduino clock …
“A 3D printed clock driven by a single stepper motor using gears to separate hours, minutes and seconds. This build replaces the electronics used in the Arduino Gear Clock by Tada3. The Arduino Nano module and ULN2003A stepper motor driver …
“With this device, you can copy the color of an object or create a new color with your imagination. Features M5Stack Color Maker has the following three functions. 1.Scan for color information This device has an I2C-connected color …
“For this project, I made a View-Master Reel scanner. I call it the View-Remaster. In short, this will scan in 3D View-Master reels and create a side-by-side (SBS) video that I can watch on YouTube. So I have been scanning …
“PUMA is an Open Source (GPL v3.0) 3D printed light microscope system designed for direct eye observations and ultra-portability with advanced options for digital imaging, measurements and computer control. The name PUMA is an acronym of some of its …
“This project is a 3D printed clock powered by a stepper motor and is controlled by an Arduino Uno. It was designed in OnShape over the course of a month. It keeps time very precisely and only needs to be …