“Hey guys! I Hope you already enjoyed my previous instructable “Arduino Robot 4WR” and you are ready for a new one, as usual I made this tutorial to guide you step by step while you make your own electronic project.
During the making of this project, we tried to make sure that this instructable will be the best guide to assist you while you chose to make your own electronic based project, so we hope that this instructable contains the needed documents.
This project is so handy to make specially after getting the customized PCB that weve ordered from JLCPCB to improve the appearance of our electronic device and also there is enough documents and codes in this guide to allow you create your beautiful weather station.
We’ve made this project in just 2 days only, just one days to get all the needed parts and finish the hardware making and the assemble, then one day to prepare the code to suit our project and hen we have started the testing and the adjustments.
What you will learn from this instructable: Making the right hardware selection for your project depending on its functionalities.Understand the weather station workflow.Prepare the circuit diagram to connect all the choosen components.Produce your own PCB design.Solder the electronic parts to the PCB.Assemble all the project parts.Start the first test and validate the project.”