ULN2803A

The ULN2803A device is a 50 V, 500 mA Darlington transistor array. The device consists of eight NPN Darlington pairs that feature high-voltage outputs with common-cathode clamp diodes for switching inductive loads. The collector-current rating of each Darlington pair is 500 mA. The Darlington pairs may be connected in parallel for higher current capability. Applications include relay drivers, hammer drivers, lamp drivers, display drivers (LED and gas discharge), line drivers, and logic buffers. The ULN2803A device has a 2.7-kΩ series base resistor for each Darlington pair for operation directly with TTL or 5-V CMOS devices.

Main Content

Arduino Interactive LED Coffee Table

“I made an interactive coffee table that turns led lights on under an object, when the object is placed over the table. Only the leds that are under that object will light up. It does this by effectively using proximity …

Project  MenoMassager

MenoMassager

“A lowcost multi-pressure, multi-speed massager with timer for Joint and muscular pain. Introduction Joint pain and muscle pain are experienced by many women during menopause. I have attempted to build a device that provides relief and helps in reducing joint …

Multiple LED Display Module

“One of the things I love working with the Arduino is LED monitors. It does not matter if they are with 7 segments or array of points and I’ve done many different designs using them. They are very interesting …

Texas Instruments

Texas Instruments Inc. (TI) is an American technology company that designs and manufactures semiconductors, which it sells to electronics designers and manufacturers globally. Headquartered in Dallas, Texas, United States, TI is one of the top ten semiconductor companies worldwide, based …

How to make your own WIFI Gateway to connect your Arduino to IP Network ?

“As so many people you think Arduino is a very good solution to do domotic and robotic ! But in term of communication Arduinos just come with serial links. I am working on a robot that need to be permanently connected …

LED Persistance of vision Globe

“This is a project similar to the one already published, but upgraded. It consists of 64 LEDs and 90 columns, so the resolution is 5760 pixels. I also used the shift registers, but 8 of them, one for every 8 …

Use Solenoids to Build a MIDI-Controlled Percussion Bot

“Percusso isnt a real set of percussion instruments and its probably too noisy to accompany serious music. But its a ton of fun to play with, and can suggest some creative licks. Some sounds are recognizable the snare drum (The …

Unipolar Motor Controller

Two circuits will be built today to control Unipolar motors. A unipolar motor is a type of step motor described as needing only a current source. By contrast, bipolar motors require two current sources to move. The complexity of this …