Other
“This instructable shows how to solder electronic parts in your PCB using Robotic Arm The Idea of this project came to my mind accidentally when I was searching for the different abilities of robotic arms, then I found that there …
“Trash bins and managing the waste in them can be messy. And overstuffing them with waste? Even messier. But trash bins that can sense your presence when you approach them to put trash and track how much of it do …
“This project allows you to “record” sensory input and store it for later use. The information is stored in EEPROM instead of dynamic memory so that it can be remembered even when the board is shut down (like a tiny …
“This fully 3D-printed clock is probably unlike any other digital clock you have seen. While in a regular LCD or LED-based digital clock the 7 segments for each of the four digits are switched on and off, the segments …
“This instructable was created in fulfillment of the project requirement of the Makecourse at the University of South Florida (www.makecourse.com). The goal of this project was to build a 3D printed prosthetic hand and control it using an …
“In this tutorial I will show you how I built an Arduino hexapod. As the name suggests, the hexapod has 6 legs but in addition to that, it also has a tail or abdomen, a head, antennas, mandibles and even …
“Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules… Today we gonna see the full tutorial on how to control the 2-Axis FPV camera cradle with joystick module, the camera cradle comes in a …
“This instructable was created in fulfillment of the project requirement of the Makecourse at the University of South Florida (www.makecourse.com) Tchaibotsky is an Arduino powered piano playing robot. The motivation was to build something that could accompany pianists …
“I have done several pen and laser machines lately, so I decided to create a custom PCB for Grbl_ESP32 for these types of machines. This is a small (70mm x 60mm) PCB with all the features a pen plotter or …
“Meet Walbi, a 2:1 scale humanoid with Arduino programs for motion capture and playback. Move it by hand, record and then play it back. Wouldn’t it be great if we could make a biped robot with some servos …