Other
“Rainbows, natural phenomena that produce beautiful spectrums of coloured light in the sky, inspire myth and legend and art and give happiness to millions of people. Just as natural rainbows are created by how sunlight plays through water droplets in …
“A small little console that allows you to quickly set, test, try many different actuators (e.g. servos, stepper, ultrasonic, DHT22, etc… ) AVRaft - a makers tool/toy I was fustrated to always needing to grab my ardunio, breadboard and jumper …
“In this Instructable I will be showing you how I made this dual aixs light tracking robot using an Arduino Uno. All the CAD and code will be included so you can build it yourself without needing any programming or …
“The chess robot uses an algorithm of Micro-Max Chess Source found on the link below: http://home.hccnet.nl/h.g.muller/max-src2.html Supplies: 1 x Arduino Mega 1 x AZDelivery LCD1602 Display Keypad Shield HD44780 1602 1 x …
“Push a button, get a treat! This is an M&M dispenser that was made for a research study to test human motivation and attention for food rewards. It uses the Adafruit Feather M4 express for control, and a ULN2003 …
“Using the TI-RSLK Max, I created a solar follower that avoids shade and follows the sun throughout the day. This small solar follower is the start of multiple iterations of a design I hope to implement before my college …
“This project is the source code for a Spot Micro quadruped, a 4 legged open source robot. This code is capable of keyboard control of a spot micro robot with sit, stand, angle command, and walk capability. The software is …
“Based on Arduino Nano , Miles is a spider robot that uses its 4 Legs to walk and maneuver. It uses 8 SG90 / MG90 Servo motors as actuators for the legs, consists of a custom PCB made to power and control …
“Introduction The PongMate CyberCannon Mark III is the newest and most advanced piece of beer pong technology to ever be sold to the public. With the new CyberCannon, any person can become the most feared player at the beer pong …
“Little Flash is a 3d printed robot powered by ultracapacitors. To prevent getting stuck, she uses a bump switch and random path adjustments. She runs for 25 minutes and can be charged in about 40 seconds using a 10 amp …