RFID RC522

MF RC522 is a highly integrated read and write card chip applied to the 13.56MHz contactless communication. Launched by the NXP Company, it is a low-voltage, low-cost, and small-sized non-contact card chip, a best choice for intelligent instrument and portable handheld devices.

Main Content

Contactless Water Fountain

“I was looking for a project that would check all the requirements set by my teachers and at the same time be fun for me to make. When looking for a subject I couldn’t help but feel inspired by …

Electromagnetic Lock With Air Monitoring

“I’ve had this issue for a while where people seemingly don’t value my privacy as much as i do myself and just barge into my room whenever they feel like it without any warning. So since i had …

M5Stack Alarm Panel with RFID - MQTT to Home Assistant

“Hello, I created an alarm panel controlled by RFID, based on a M5Stack with RFID face. Communication is done via secure MQTT over WiFi. M5Stack-HA-Alarm-panel M5Stack alarm panel with RFID face to control Home Assistant MQTT alarm panel …

Access Control System - Everything Can Be Configured Via Web

“In this project, make ESP RFID accsess control board with ESP8266 and RC522. Everything Can Be Configured Via Web UI (IoT) Hi everyone in this project we gonna make ESP RFID accsess control board with ESP8266 and RC522. Access control …

A Very Compact Alarm with Card Reader and Real-Time Clock

“This is an alarm for your house that rings when a movement is detected, like when the door is open or when a body walks in front of it. Story This is my first project released on Hackster and every …

Solenoid Door Lock Contol RFID

“Solenoid Door Lock Contol RFID | Security Access Arduino. Solenoid Door Lock Contol RFID | Security Access Arduino. In this tutorial we will learn how to use the RFID RC522. So we can use an RFID system and an Arduino to open …

DIY Idea with RFID

“Building an RFIDD access control system. Hello Friends, in this video i will show you How to Make a Rfid Door Lock with led On . im using the Arduino uno and Rfid for Making it. its very portable and very …

Monopoly RFID Automated Bank

“This project was created with the already existing electronic bank monopoly in mind. It uses an arduino uno and rfid to operate. Moreover it is equiped with an lcd and a keypad for navigation. I did make it using a …

Simple RFID Scanner Battery Powered (MiFare, MFRC522, Oled, Lipo, TP4056)

“In this instructable I show you how I made a simple RFID UID reader which reads the UID of a Mifare RFID card. The program is quite simple and on a breadboard the reader was quickly made. Then I soldered …

RFID Lock System Using Arduino

“Hello everyone, This is my first instructable and was presented by Judhi Prasetyo. The workshop was hosted by Assembly , where I am working as an intern and its one of the best place to work if you are a maker …