Content for MG996R

DMX Animatronic Robot

“This project describes the development of a fully functional animatronic prototype. It is implemented from scratch and it aims to be a guide for the development of future more complex animatronic robots. The system is based on an Arduino microcontroller …

DIY Arduino RC Receiver for RC Models and Arduino Projects

“In this tutorial we will learn how to make an Arduino based RC receiver. Since building my DIY Arduino RC transmitter in one of my previous videos, I got a lot of requests from you guys, to make a dedicated …

Simple Animatronic Mouth Using 3D Printing, Arduino and Python

“Inspired by Disney’s Shaman Animatronic, as well as 3D printed designs by WillettFX and TheDutchEdition, I recently decided to build a 3D printed animatronic mouth design. Although the mechanics of the design are very simplified compared to the other …

Recycle Sorting Robot with Google Coral

“A robotic arm that uses Google’s Coral Edge TPU USB Accelerator to run object detection and recognition of different recycling materials. Story Did you know that the average contamination rate in communities and businesses range up to 25%? That …

Intellisaurus

“Intellisaurus is intended for many skill levels. The easy to follow instructions allow someone with a modest skill level to assemble the robot and have it walking in a matter of hours. There is no soldering or programming required to …

3D Printed Motorized Hand

“This instructable was created in fulfillment of the project requirement of the Makecourse at the University of South Florida (www.makecourse.com). The goal of this project was to build a 3D printed prosthetic hand and control it using an …

Z1: Wifi-Controlled Robot Arm

“This is the 3D printed Robotic arm that I designed. The goal was to make a robot that was both easy to build and easy to control. If you are interested in buying a kit for this robot you can …

End-Effector and Control Logic for Robot

“In this project, I developed an easily implementable and economic control system for the management of electric drivings. This system shall apply to an pre-existing robot endowed with three axes. In addiction, for this robot I have added an axis …

Homemade RobotArm Whit Special Homemade Controller

“This built is a little advanced and not easy to make same because it is made from scrap but my idea is, use a part of build or all, if have a RobotArm already you can use code. Or / And …