Other
“I always liked the design of the Wii’s Nunchuck controller. But normally you can only use them if they’re physically wired to another device called the Wii Remote. However, with some hardware and software tinkering and time, it …
“In this project we’re going to learn how easy is to make our very own Tetris game with a 2 axis analog joystick and a MAX7219 LED dot matrix display. To write the logic for these peripherals, we’ll …
“5in1 eucational Arduino-compatible set I made for my nieces This is an educational Arduino set I’ve prepared for my nieces to teach them about electronics. While I was at it - I decided to also make it Open Source and …
“Draw phosphorescent light trails with a machine designed and built completely from scratch! The story: In between studying breaks during midterm week, my friend Brett and I designed and built this machine that utilizes a laser and mirror system to …
“Hey guys, I am back with another cool Robot chassis from BangGood. Hope you have gone through our previous projects – Spinel Crux V1 – The Gesture Controlled Robot, Spinel Crux L2 – Arduino Pick and Place Robot with Robotic Arms and The …
“Introduction I own a C64 with Quickshot II Turbo joysticks. Unfortunately the joysticks are worn out. On one, one spring of the micro switch is broken and the micro switches are discrete, which means there is a spring between two …
“I wanted a compact and easy to use controller for all the eye mechanisms I’ve designed that would allow me to control them easily with one hand - including away to move the eyes, adjust how open/closed the eyelids …
“My previous instructable was an attempt to make an eye mechanism that was as accessible as possible to as many people as possible, but in this project I wanted to design something that was more of a middle-ground between accessibility …
“A completely automated way to take photos and convert them into a 3D object. DESCRIPTION This turntable is a new and improved version of my hand cranked version (which is fully 3D-printable, no extra parts needed. Check it out here …
“This project was done as part of our project week at University of Applied Sciences Osnabrueck. It was inspired by already available Instructables like: Arcade Spielekonsole Mit Raspberry Pi Barcade Arcade for all Except having an arcade machine after finishing …