Other
“GPS module for Yaesu VX-8DR/DE handheld transceivers with ublox NEO-6M chip and Arduino Nano by Dmitry Melnichansky 4Z7DTF (4X5DM since June 2016 4X1MD since July 24, 2017). Overview When I was buying my Yaesu VX-8DE, I …
“How I created a $10 ESP8266 GPS Tracker that uses Open Wi-Fi networks & DNS exfiltration for communication. Low-Cost Tracking Challenge In a recent Hak5 episode, I took part in a challenge to track our elusive friend, Irish, and determine the …
“A gift box, locked from the inside, that will only open at a special location that can be set by the giver. When the button is pressed the box displays how far away they currently are. They must travel a …
“Simple project w/ GPS Neo-6m and ESP32 in this project, with the help of GPS Neo-6M, We receive and display the values of Altitude, Latitude, Longitude, and Speed. also using TFT LCD I created a beautiful user interface for it …
“This tutorial is for building an ionizing radiation detector with Arduino! Hello! I decided to build this project because ionizing radiation can be dangerous, and it is very hard to know if it’s there. I am hoping this project …
“This project is for building a live sailboat tracking system that communicates over LoRa with E22-900M30S modules! Supplies - 3x DFRobot FireBeetle ESP32 IOT Microcontroller (Supports Wi-Fi & Bluetooth) - 2x DFRobot GPS Module with Enclosure - 2x DFRobot Gravity: I2C BMI160 6-Axis …
“This project is an e-Paper clock and weather station that automatically sets itself (via GPS) and can be built to last about 6 months on 4 AAA batteries. It purposefully does not need any network connections for the sake of …
“Recently there have been beach restoration projects in our city and instruments were required to measure the depth of the sea floor at various locations. This process turned out to be tedious and expensive due to the labor costs as …
“This is a bicycle journey recording device utilizing Arduino and a GPS module. Im riding an electrical bicycle from time to time during weekends. Several good bicycle riding routes which pass by the lakes and parks are located near to …
“This project describes the development of a multi-mode scanner platform, which can be described as a Scientific Tricorder. A few years ago, after taking my first contacts with embedded electronics, I decided it would be time to try building a …