Content for HMC5883L

HMC5883L

The Honeywell HMC5883L is a surface-mount, multi-chip module designed for low-field magnetic sensing with a digital interface for applications such as low- cost compassing and magnetometry.

Arduino Analog + Digital Compass with HMC5883L sensor

“Electronic version of the Compass, where the position of the needle is indicated by group of a three light-emitting diodes. Compass is device used for navigation and orientation, and consists of a magnetic needle that is mounted on a pivot …

Virtual electronic finderscope

“StarPointer is a virtual electronic finderscope for astronomical telescopes. This device works with Stellarium and helps the observer identify objects in the sky. This unit can be attached to the telescope without modifications and connects with the computer through the …

3-Axis Magnetometer

“Measure the magnitude and direction of Earth’s magnetic field with the HMC5883L 3-axis magnetometer. Introduction In this project, we’ll be interfacing the HMC5883L 3-axis magnetometer to an Arduino Uno. This device can measure the magnitude and direction of …

Long Range Autonomous Boat

“Recently there have been beach restoration projects in our city and instruments were required to measure the depth of the sea floor at various locations. This process turned out to be tedious and expensive due to the labor costs as …

GorillaBot the 3D Printed Arduino Autonomous Sprint Quadruped Robot

“Every year in Toulouse (France) there’s the Toulouse Robot Race #TRR2021 The race consists of a 10 meter autonomous sprint for biped and quadruped robots. The current record I gather for quadrupeds is 42 seconds for a 10 meter …

A Tiny Compass With ATtiny85

“This is our first project with ATtiny85; a simple pocket digital compass (in collaboration with J. Arturo Espejel Báez). ATtiny85 is a high performance and low power microcontroller. It has 8 Kbytes of programmable flash memory. Due to this, the …

Vehicle Detection With D1 Mini and Magnetometer

“Detect vehicles using QMC5883L and actuate swinging gate using relay to allow exit My folks have a swinging gate at the entrance of their driveway with a keypad on the outside. Guests can come easily, but due to an auto …

FossaSat-1, Open Source Satellite

“Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems. Set to launch in Q3 of 2019, FossaSat-1 will be Spains first satellite launch by a non-government led organization or company. FossaSat-1 is the …

3D printed mower build

“Sit back, relax and let the robot do the work. At the same time the grass becomes thick and lush due to the constant mowing. No more grass cuttings - sounds to good to be true….. and by the way you …

ST Connect (Dike Monitoring)

“ST Connect is an autonomous connected object that collect and send data, in order to monitore dikes in the Barcellonette. #PolytechSorbonne Story Introduction During our studies at Polytech Sorbonne in 2018, Earth Science teachers needed to monitor dikes in the …