Content for Dust Sensor

Dust Sensor

This module is a dust sensing system based on the sensor GP2Y1010AU0F. It integrates an internal infrared emitting diode (IRED) to detect the reflected light of dust in air and generate an output voltage proportional to dust density so as to measure dust and smoke concentration.

Smart Plant Monitoring System

“The Plant Monitoring System is an IOT product designed to provide climate/irritant readings to develop a sync & start smart irrigation sys. The idea for the Smart Plant Monitor was derived from Deep Dive Codings IOT bootcamp. The idea was …

Air Quality Monitoring ESP32-Based System

“The system will be an ESP32 NodeMCU-based Air Quality monitoring system for checking PM, particulate matter (PM) as well as humidity… Air Quality Monitoring ESP32-Based System The system will be an ESP32 NodeMCU-based Air Quality monitoring system for checking …

Automatic Plant Watering + Time-Lapse

“Automatic Plant Watering System with a built-in time-lapse to watch your plant grow! With this system, you never need to worry about it running out of water again. Using a moisture level sensor in the plant, every 30 minutes the …

Long term dust monitoring system

“Monitor the surrounding dust and large particle (>0.5µm) for long time using Blynk IOT and plot the data for further research. In this project I have made a IOT based Dust density monitor which can measure the surrounding …

Long term dust monitoring using GP2Y1014AU0F and Blynk

“Monitor the surrounding dust and large particle (>0.5µm) for long time using Blynk IOT and plot the data for further research. In this project I have made a IOT based Dust density monitor which can measure the surrounding …

IOT Based Air Monitoring Mesh System

“A simple array of a few Particle Argons to monitor and report environmental conditions of a mesh network of several spaces. The basis for this project was to utilize a collection of Particle Argons to gather, publish, and chart data …

BackpAQ Personal Air Quality Monitor V2

“Welcome to the Instructable for the DIY BackpAQ Personal Air Quality Monitor V2! As we did in the Instructable for BackpAQ Version 1, we will build a high-quality instrument capable of measuring and monitoring the most common sources of air …

Smart Flower Pot

“A smart watering system that automatically waters a plant. Story For this project, we had to include a set of components we had needed to include: The BME280, Seeed Grove Dust sensor, Seeed Grove air quality v1.3 sensor, Capactive …

LoRa Powered Air Quality Monitoring System

“The project tackles one of the most serious issues of the 21st century, the degrading quality of air around us. We use LoRa to address this. In the recent years, air pollution has been a growing concern for the harmful …

Particle Sniffer

“While working with the prior projects on PM2.5 assessment I noticed the drawback of being unable to locate the point sources of small particle pollution. Most sampling done by the municipalities and satellite imagery collect wide sources that don …