Main Content

A better way to quantify radiation damage in materials

“More complete than existing methods, the new approach might enable longer operational lifetimes for nuclear reactors. It was just a piece of junk sitting in the back of a lab at the MIT Nuclear Reactor facility, ready to be disposed …

A Molecule of Light and Matter

“Using light, atoms can be made to attract each other. A team from Vienna and Innsbruck was able to measure this binding state of light and matter for the first time. A very special bonding state between atoms has been …

All Band Radio with New Firmware

“How to make a relatively simple All band DSP Radio Receiver with color touch display which is based on the Si47xx series chip This time I will return to one of my previous projects published a few months ago with …

Analog Style Arduino OLED Clock

“This is a tutorial how to show you how to create analog style clock using Arduino and a small OLED display. There is also a video version of this tutorial. You will find the link at the end of this …

Another Sound Level Meter Circuits

“This is the additional project for the Sound Level Meter (From hereafter as SLM) circuit making. I introduced the SLM prototype in the previous instructable as below. https://www.instructables.com/Sound-Level-Meter/ While working on the SLM prototype, I thought …

Arduino Alarm Clock & Apple Watch Charger

“In this tutorial, I will be walking you through the steps of building an Arduino alarm clock with an apple watch charger from scratch. Since I am building this from scratch, the process of building the housing for the circuit …

Automating neutron experiments with AI

“Oak Ridge National Laboratory researchers are developing a first-of-its-kind artificial intelligence device for neutron scattering called Hyperspectral Computed Tomography, or HyperCT. The fully automated, AI-driven platform can rotate a sample in almost any direction, eliminating the need for human …

Bigtime Basement Build CNC for Laser and Wood Projects

“For this CNC build, I went after a laser, wood, and aluminum cutter/carver. Comparable units from reputable manufactures are over $2000. This one came in under $800. While I was at it, I made an Arduino Shield to simplify …

BilaSens GSM River Water Sensor

“This project starts in 2020 during pandemic lockdown, after that it have loong periods of dust collecting. Now is ready to start collect data and the code and the setup will be shared with the world! The setup is changed …

Build Your Own Plant Humidity Sensor

“Do you want to perfectionize your plants well being? Are you unsure how much water your plant needs? or do you just want to track how much water the plant consumes? Then this project is for you. Supplies Electronics: - Arduino …