Other
“Made a simple H Bridge setup by using SMD Mosfets, Arduino is used as control unit. By using this small 20mm x 20mm board, we can power small DC motors that operate at a lower voltage, like below 5V, from …
“This project makes use of a previous project Modular Display Element to make a digital clock, using four of the modules connected together and controlled by a Microbit and an RTC. Supplies: - Microbit V2 (preferred due to built in speaker …
“Exploring a sediment-rich location in this Mars delta offers tantalizing opportunities for the six-wheeler’s science team. NASA’s Perseverance Mars rover has begun exploring an area the science team calls “Yori Pass” near the base of Jezero Crater’s …
News New nanoscale 3D printing material designed by Stanford engineers could offer better structural protection for satellites, drones, and microelectronics
“Engineers have designed a new material for nanoscale 3D printing that is able to absorb twice as much energy as other similarly dense materials and could be used to create better lightweight protective lattices. Science fiction envisions rapid 3D printing …
“Researchers at the National Institute of Standards and Technology (NIST) have created grids of tiny clumps of atoms known as quantum dots and studied what happens when electrons dive into these archipelagos of atomic islands. Measuring the behavior of electrons …
“NXP Semiconductors (NASDAQ: NXPI), the leader in automotive processors, today announced a new S32K39 series of automotive microcontrollers (MCUs) optimized for electric vehicle (EV) control applications. The modern S32K39 MCUs take electrification into the future with high-speed and high-resolution control …
“Designed to overcome limitations of inductive sensing, the NCS32100 rotary position sensor brings high speed and accuracy to industrial applications. onsemi (Nasdaq: ON), a leader in intelligent power and sensing technologies, today introduced an innovative dual-inductive rotary position sensor, which …
“What’s up, everyone? Here’s something REALLY HOT: a DIY mini PCB hotplate made entirely from scratch. The idea was to make a small and minimal reflow hotplate that could be used for SMT reflow work on small PCBs …
“What is a phase-locked loop (PLL)? A phase-locked loop (PLL) is an electronic circuit with a voltage or voltage-driven oscillator that constantly adjusts to match the frequency of an input signal. PLLs are used to generate, stabilize, modulate, demodulate, filter …
“In this project we will be creating an RC Car from scratch using 3D printed parts! Which will be used in my next project where we will be making the RC Car fully autonomous, that can drive itself, detect signs …