Content for Project

Nano sheet factory

“Sometimes even very expensive and well build equipment breaks. This recently happened to researcher Biljana Mojsoska, a chemist at Roskilde University. She was working with nano sheets, an anti-bacterial coating for medical surfaces, as her machine stopped working. The fact …

NeoPixel Party Bike - Music Reactive Light Animations With Controller

“I made my NeoPixel Party Bike for two reasons: First, I’ve worked on a few simple NeoPixel projects in the past and it was like a “tease” that made me want to know more-more-more! Second, I’m a member …

Node.js wireless controlled ROVER

“A wireless ROVER which is controlled by a web-page served by Node.js server, with the help of Sockets. Project Idea Node.js is one of the best options for Real-Time Applications. I have previously worked on some real-time apps …

Raspberry Pi 16-channel WS2812 NeoPixel LED driver

“WS2812 LEDs (‘NeoPixels’) are intelligent devices, that can be programmed to a specific 24-bit red, green & blue (RGB) colour, by a pulse train on a single wire. They are capable of being daisy-chained, so a single pulse line can drive …

Reverse Vending Machine (RVM)

“Designed a machine in which the user can dispose plastic and metal waste and redeem points to collect rewards by scanning the QR code. MOTIVATION: Where Do Plastic Water Bottles End Up? In landfills, floating on oceans, or rivers and …

Project  SMD-flipper

SMD-flipper

“Two stepper motors and an Arduino to turn around an SMD part. For my manual pick and place machine, it would be handy to have a tool that flips SMD parts that are upside down in the storage box. The …

TEDuino: A Modern TED (264) Series Commodore Datasette

“As part of my Commodore Plus/4 series, chapter three of the user’s manual includes a section on using a Commodore Datasette. In a previous post, I assembled the modern replacement for the Datasette, the Tapuino. “What’s a …

thirtytwopixels

“Hardware Raspberry Pi Zero WH Adafruit RGB Matrix Bonnet A 32x32 LED matrix with a HUB75 connection (available on e.g. Adafruit, Pimoroni, Aliexpress). I used this one. A 5V 4A power adapter Refer to the Adafruit instructions to set …

Throttle Quadrant and Trim Wheel

“A modular 3D printed throttle quadrant and trim wheel for use with flight simulators. Having recently upgraded my PC to enable it to run MS FS2020, I was inspired to improve the controls I was using. A keyboard does not …

Upcycling Dishwasher

“I used an Arduino Nano to fix my dishwasher. Story I had that all-high-voltage oldie dishwasher that stopped working. Its program switch has burned and I could not find the replacement part. But it is a quite good challenge for …