Content for Project

Homemade CNC Machine From DC Servo Motors and Wooden Wine Boxes

“Today, I would like to share how to build a 3 axis CNC machine at home using available or discarded materials. Specifically in this project, I reused 2 old DC servo motors and 2 wooden wine boxes, as well as …

Infrared Remote Decoder/Tester

“A simple decoder or tester for infrared remote controls. Great for obtaining the command code for each button on the remote. Going through boxes of junk that had been collected over a number of years, I came across dozens of …

Project  Laser Harp

Laser Harp

“This is a musical instrument that uses MIDI communication, lasers, and photoresistors to generate sounds. Story To create this instrument, I took inspiration from other existing laser harp models, which however are very bulky and expensive. My goal was therefore …

Lora Weather Station With Arduino

“Simple Weather Station With Lora, Arduino & Sensors Today iam going to show you how to make LoRa (rfm95) Weather Station With Arduino & Sensors this is a simple project does not require high knowledge about arduino and electronics this is an …

Lor’s matrix glasses

“DIY (NO PCB) LED matrix glasses using 3mm LEDs! LED Matrix glasses made with discrete 3mm LEDs using their leads as the matrix frame. I started working on this project out of nowhere and a little over 2 days later …

Make An Arduino Tic Tac Toe Game With An AI Opponent

“Today we’re going to be building a Tic Tac Toe or Noughts and Crosses shield for an Arduino. The game board is made up of a 3×3 grid of RGB LEDs that light up green or blue to …

Neotron Pico

“A Neotron system powered by the Raspberry Pi Pico, in a micro-ATX form-factor. The Neotron Pico is based around the idea of the Neotron-32, but using a low-cost Raspberry Pi Pico instead of a Texas Instuments Tiva-C Launchpad. It …

Nordic Sense Gloves

“Wearable Infrared thermometer with Bluetooth connectivity. Its was my wish to make something with Nordic Dongle, unfortunately I did not made. When I get these kits from Nordic team during CES event, I promise them I make something with this …

Office Clock using RaspberryPi

“Digital office clock, also displaying interior and exterior temperatures, made with RaspberryPi Zero W and a 16x16 Led Matrix Screen. Ever hated the fact that you have to walk to the thermostat to see if the room temperature is good …

Posture Watchdog

“A wearable which accurately monitors your sitting posture and activities using machine learning and alerts you. Overview Before COVID19 people had to do some physical activity willingly or unwillingly in their normal life activities. For example they had to commute …