Other
“This project makes use of a previous project Modular Display Element to make a digital clock, using four of the modules connected together and controlled by a Microbit and an RTC. Supplies: - Microbit V2 (preferred due to built in speaker …
“What’s up, everyone? Here’s something REALLY HOT: a DIY mini PCB hotplate made entirely from scratch. The idea was to make a small and minimal reflow hotplate that could be used for SMT reflow work on small PCBs …
“What is a phase-locked loop (PLL)? A phase-locked loop (PLL) is an electronic circuit with a voltage or voltage-driven oscillator that constantly adjusts to match the frequency of an input signal. PLLs are used to generate, stabilize, modulate, demodulate, filter …
“In this project we will be creating an RC Car from scratch using 3D printed parts! Which will be used in my next project where we will be making the RC Car fully autonomous, that can drive itself, detect signs …
“This SDK will convert and stack various Arduinos to/from a Raspberry Pi. Thus the name RasDuinoHat project was formed. The Seed to experimenting With so many different Arduino boards available and various SDK’s on the market, a challenge …
“Waking up is hard, especially as a college student who barely gets any sleep. For me alarms are absolutely necessary, because left to myself I would sleep over 12 hours before waking up. But I have non-scientifically come to the …
“Single axis solar tracker project tutorial What do you know about solar trackers? A single-axis solar tracker system is a system that follows the light according to its intensity. this is one of the most searched Arduino projects. there are …
“This is by far the best way to control your livestreams, any professional streamer uses something like this. This is a so-called STREAM DECK. But this one is homemade and personalized with an Arduino MICRO, a TFT display, push buttons …
“My first real project with Arduino, I had a few things to learn on the way and still plenty more to do! I have commented as much as I feel needed so you should be able to easily modify the …
“I love tutorials that DIYers put online. They save so much time, and can make tackling new projects a little less intimidating and easy to comprehend. The problem I continue to run into however is the fact that no one …