Other
“Phone and Alexa Controlled RGB Christmas Tree Lights with WS2811 LEDs and ESP32 Greetings, DIY enthusiasts and tech aficionados! Get ready to embark on a thrilling hackster project that will revolutionize your holiday season. Imagine the enchantment of controlling vibrant …
“We all know that NanoLeaf LED panels are quite expensive. However, you can create today’s project at a very affordable price. Materials Let’s start with the things you will need: a 12V power supply, a perfboard, an ESP8266 …
“A simple RGB Color Mixer for photography use, its powered by an Seeed XIAO M0 and uses three pots for controlling the colors. Hey there, guys. I have a colorful project for you called The COLOR MIXER Version 2, which …
“Made a large version of the regular WS2812B LED by using 8 regular RGB LEDs connected with a WS2811 LED Driver. So, this is a NEOPIXEL LED, which is a little larger than a standard PIXEL. By using eight Regular …
“This project uses the Arduino Nano 33 IoT, the Arduino IoT Cloud, E13.1 (streaming DMX) and Alexa to control 12 volt WS2811 LEDs. Last year I realized that the safest way to display lights for the holidays would be …
“Meet Geoleaf, my low cost and 3D printable version of Nanoleaf lighting panels. I have wanted some Nanoleaf lights for a long time but the price has always been too high for me. So I thought I would set about …
“I needed some better lighting for my videos. So I figured I would take the opportunity to make my own. The goal is to have two panels one on either side of the camera so that the lighting is more …
“In a previous project we created an interactive coffee table, which lit up leds under an object. In this project, we reuse that table to create a snake game from the 2D matrix of LEDs. If some parts of the …
“Control multiple output devices using single GPIO pins from the microcontroller I was needed to control almost 200+ relays using one microcontroller and during research I found out that best way to do it is by using a GPIO Expander …
“I wanted to get just the right color on my house LEDs to emulate the warm color of patio lights. So, I built a remote control that has knobs for the red, green, and blue colors and an OLED display …