Other
“hello friends in this post I have build a Arduino based wire cutting machine using Nema 23 Stepper motor. This machine Automatically cut and strip the Wire as per given data provided by a small HMI. Components used: - Arduino Nano …
“An open-source, low-cost, large-format 3D printer that can print directly from shredded plastic trash instead of filament The Trash Printer is an open-source large-format 3D printer that can print new and useful things directly out of shredded plastic trash. Polypropylene …
“Gcode Controlled Drawing Plotter with Arduino I want to do a pen plotter. There are many plotter systems. I am doing it, the system that uses the belt. GRBL and Arduino CNC Machine Working Principle Overview The main parts I …
“3D Printed ESP32 WROOM 32D Perpetual Timepiece Using a wooden base, 3D printed parts and an ESP32 WROOM 32D module to display the time on four 28BYJ-48 Stepper Motor driven “perpetual rotating” digits. Time is stored on a RTC …
“7 segment clock This project was inspired by another similar project that I saw a few years back. I mostly rebuilt it completely and challenged myself to print it as small as possible on a standard 3d printer using a …
“I created this pill or medication dispenser because my wife has to take several tablets in the morning and evening and was getting confused with which tablets she had taken and therefore not always taking the right medication at the …
“This robot is a true creation of the idea many years ago brought on by Samy Kamkar’s robot that “utilized” his algorithm for cracking combination locks. Samy Kamkar never demonstrated his robot actually performing the algorithm, though he implied …
“Two hand analog clock with automatic time adjustment using NTP via WiFi. Contrary to the formerWiFi Sync Clock, this clock works normally with monotonic CW rotation (except origin alignment once a day). - It resets the position of hands once a …
“Hi, in this instructable I will go over how to create a 2-Axis CNC machine. This particular design utilizes parts which can be purchased at local hardware stores, reducing the price greatly. It also uses 3d printed parts which allow …
“3D printed and run by a single stepper motor, this unique clock’s hands float in a hollow frame. The changes that I made were: - Use of a cheap 28BYJ-48 stepper motor - New electronics based around a ATtiny1614 microprocessor …