Other
“People generally worry about the wastage of water when they switch ON the motor and forget to switch OFF the motor. This project may help them in saving water for the future. A water level detector is used to control …
“Transfer Data Between any USB_STORAGE_MEDIA devices. I started to develop this project when I was in my 11th grade, as being from a very small town of India (Sambalpur my town) it was hard to gather sufficient information required to …
“This Project is the starting of a big project which control a big process in low cost. I choose raspberry pi and its my first project in pi. I already work with i/o controllers for my official project, and …
“Water plays an important role in our day-to-day life. Although our mother earth is covered with 71% of the water we have just very little; that is approximately only 1.2% which is available for domestic usage. As we being …
“As an electrical engineering student, we had a class in the 5th semester that was entirely evaluated on a project done in less than 2.5 months. This project was a Direct Digital Synthesizer (DDS) based on a Field Programmable …
“Hello guys, I would like to share with you my last project. Tic-Tac-Toe Game. This game is for only two people/players. They are trying to place four squares of their color next to each other. These four squares can …
“Power supplies are the most basic tool every DIY / maker / electro-enthusiast should have. While the lab bench power supplies are great but you can’t carry them everywhere and that’s why you need a portable power supply, but they …
“Commercially available transmitter and receiver pairs are usually PPM or PWM based. Using them with any microcontroller is problematic as you require a lot of pins and hence isn’t that efficient. Using Serial modules like Xbee or HC-05 …
“The Attiny85 does not support specific hardware for SPI and I2C comunications as on ATmega series, instead there is a hardware module called UNIVERSAL SERIAL INTERFACE (USI) that can be only configured to perform SPI or I2C. In this small …
“My name is Niels Post. I am a Computer Science student from the Netherlands. This robot is part of my internship at the Vrije Universiteit Brussel. The robot is meant for use as a simple moving platform robot. It is …