MAX30102

The MAX30102 is an integrated pulse oximetry and heart-rate monitor biosensor module. It includes internal LEDs, photodetectors, optical elements, and low-noise electronics with ambient light rejection. The MAX30102 provides a complete system solution to ease the design-in process for mobile and wearable devices. The MAX30102 operates on a single 1.8V power supply and a separate 3.3V power supply for the internal LEDs. Communication is through a standard I2C-compatible interface. The module can be shut down through software with zero standby current, allowing the power rails to remain powered at all times.

Main Content

Pulse Oximeter and Heart Rate Monitor

“Arduinos are incredibly useful tools for all sorts of projects. Given the current COVID-19 pandemic, having easy, fast, cheap, and reliable access to health information is more important than ever. While an Arduino might not be the tool of …

Smart Bed Side Lamp for Patients

“Measuring things are easy but keep track on them are hard. When we sick doctor ask us to measure the body temperature and record it but we are very reluctant do so. It is not just temperature but blood pressure …

How to Make Heart Rate & Blood Oxygen Detection w/ MAX30102

“How to Make Heart Rate & Blood Oxygen Detection with MAX30102 Pulse Oximeter using Arduino In this project we only use the max30102 heart rate blood oxygen sensor module. Max30102 integrates a red LED and infrared LED, photodetector, optical device, and …

HealthConnect : An IoT Arm Band powered by MicroChip

“A Wearable Medical device to stream the person’s health data (ECG, Heart Rate, SpO2, Activity) in a secured AWS for remote monitoring Due to global Covid-19 pandemic forcing many people to remain at home, the current attention on patient-centered …

DIY Blood Oximeter

“Monitor your blood oxygen level with this ESP32 based Oximeter. This Oximeter costs less than 10$. In 2020, the world faced an invisible monster named Corona Virus. This Virus made people very sick & weak. Many people lost their good ones …

Open Source Pulse Oximeter for COVID-19

“An easily constructed USB-powered pulse oximeter device that can be built for around $25 and features an OLED display. COVID-19 is a disease caused by the SARS-CoV-2 virus that primarily attacks a person’s respiratory system. Some …

Beating LED Heart

“It’s been 5 wonderful years since I married my wife. I am giving her this electronic heart. It can sense the excitement. It beats according to the holder’s heartbeat. She’s been supporting me on many of my …

Smart Health Assistant via Sparkfun Artemis

“A smart cardio-health assistant based on Sparkfun Artemis ATP Artemis is the flagship microprocessor module, developed by Sparkfun that will be integrated into the next generation of efficient development boards. Based on Cortex-M4F with BLE 5.0 capability along …

ATtiny85 Pulse Oximeter and Photoplethysmograph

“Displays your pulse rate, blood oxygen level and a moving graph of each heart beat, the photoplethysmogram (PPG). This project implemented on an ATtiny85 displays a moving Photoplethysmogram together with pulse rate and estimates of SpO2 - blood oxygen percentage. It …

Pulse Oximeter With Much Improved Precision

“If you recently visited a doctor, chances are that your basic vital signs were examined by a nurse. Weight, height, blood pressure, as well as heart rate (HR) and oxygen saturation in peripheral blood (SpO2). Perhaps, the last two were …