Other
“The Hydrosys4 is a hobbyist project based on the raspberry PI3 (but it also works just fine for the RPi0W). I started it because I could not find a proper irrigation system for my balcony and terrace plants, the system …
“This device can able to perform Frequency Counting,Oscilloscope,Capacitance Measurement,Continuity Testing,Temperature and Humidity sensing,Digital Clock having TIME and DATE.This device will be useful for doing electronic projects.”
“I wanted to build a Nixie clock driven by an Arduino and found a few places on the internet, but none were 100% complete to get it working from the beginning to end. I either found bad wiring diagrams, bad …
“Hello guys!!! Okay this project was my final year project. The purpose of this project was to monitor room temperature and humidity at workshop of my University because some electronic component malfunction due to the unfavourable temperature and humidity. Just …
“On previous tutorials, we have been playing with NodeMCU, sensors and learning how to capture and log data on ThingSpeak (an Internet of Things (IoT) platform that lets you collect and store sensor data in the cloud and develop IoT …
“In this guide I will show you how to make your own Arduino learning shield. This learning shield can be useful at schools, universities and to everyone that want to start dealing with the Arduino. With this shield you will …
“In today’s tutorial, we will use an ESP-01, which is the ESP8266 in configuration 01 (with only 2 GPIO), for temperature and humidity readings of the DHT22 sensor. I will show you an electrical schematic and the ESP …
“Today, we are going to discuss about a digital thermometer that displays information concerning temperature and humidity, which are read by a sensor and stamped on a color chart, all in real time. In this Project, I explain the use …
“Sensors, with an ESP32 LORA, can be easily designed for safety purposes involving gas, temperature, and humidity. Today, Im going to show you precisely how to use this microcontroller module as a Sender and Receiver. Also, I’ll show you …
“More than just a pretty (OLED) face - this multisensor (temp, humidity, motion, etc) has MQTT data for your home automation system, as well! This project is my homemade/DIY temperature/humidity multi-sensor, based on the NodeMCU ESP8266, and a DHT22 …