Content for BMP280

DIY Air Quality Sensor + 3D Printed Case

“This guide has all the information you need to create a very capable, pocket sized sensor. To get the most out of our DIY air quality sensor, we need it to be: Pocket-sized Battery-powered Have a charging circuit included Connected …

ESP32 Air Quality Monitor

“Keep track of air quality with pretty graphs These are my prototypes of an IOT air quality monitor primarily based on the ESP32 and CCS811 sensor. They’re meant for indoor use. They are not the prettiest at the moment …

4WD Security Robot

“The main goal of this project was to build a security mobile robot capable of moving and collect video data in rough terrain. Such a robot could be used to patrol the surroundings around your house or hard to reach …

Solar Powered WiFi Weather Station V2.0

“This Instructable is a continuation to my earlier weather station project. It was quite popular on the web, people around the globe made their own by following it and given valuable feedbacks for improvement.By taking consideration in to the …

Temperature/Humidity Measurement with NodeMCU

“Temperature and humidity measurement with BME280, a Raspberry Pi and NodeMCU. I use MQTT, InfluxDB, Telegraf, Grafana and MicroPython. Story Introduction I have no smart home, but I wanted to have some statistics about temperatures / humidity in several rooms in …

Improved WeatherStation 20x4

“Temperature, humidity and barometric pressure showing a comparison to a previous point in time and graphing the trend. Story I wanted to get more meaningful information from a basic temperature, humidity and pressure setup and I figured the way to …

Monitoring System for Smart Crops

“Design and build a system to monitor the status of your crops using the Netduino 3 WiFi. In Colombia, and the world at large, there is an urgent need to obtain renewable energy resources as ecosystems due to climate change …

ESP8266, BMP280, MQTT Weather Station

“This will guide you trough making a simple weather station with good accuracy. Here we use a ESP8266 WIFI development board to connect the sensor to the internet to save the data. A lot of flavorous exist and will work …

A Simple Pressure Measurement Device for Educational Purposes

“Below you find a very simple and easy to build device to demonstrate pressure measurements. It might be usable for schools or other STEM related projects, but may also be adapted to be integrated into other devices. While there are …

Project  Atmoscan

Atmoscan

“ATMOSCAN is a multisensor device aimed at monitoring indoor air quality.While many projects have been published that have similar purpose, this one is a complete system that summarises them all. It has an LCD color display, it is time …