Other
“For the casual flight simmer, a peripheral device that sits somewhere between arcade and realism. Hopefully this will inspire someone to make something cool! How it works: I built this device to work with Microsoft Flight Simulator on the Xbox …
“This is by far the best way to control your livestreams, any professional streamer uses something like this. This is a so-called STREAM DECK. But this one is homemade and personalized with an Arduino MICRO, a TFT display, push buttons …
“A 6DOF DIY HID. A what? A 6 degrees of freedom, do it yourself, human interface device. In other words, a 3D mouse, or an open hardware SpaceNavigator. You know, one of these thingies CAD designers use to zoom around …
“This is a multi-voice programmable synthesizer built from an Arduino Pro Micro. The voices come from Arduino output pins programmed to produce square waves and pulse waves. One of these pins is used to subject an external audio input to …
“A mini folding cyberdeck based around a Raspberry Pi Zero 2 W, a Zero4U USB Hub, a DreamGear MiniKey, and an Adafruit Mini PiTFT 1.3” This is a little project I’ve been working on and off for a …
“Hello all. A disclaimer right up front, I didn’t shrink the remotes and that’s not a photo of my remotes through a microscope. But what I did do was shrink them down to the buttons I use the …
“Have you ever wanted to motion with your hand where you want your mouse to go? This project is for building a Gesture Mouse. It plugs into your computer and turns your gestures into mouse movements! With this project, you …
“Hi!I am Crius and I LOVE MIDI Controllers! The last couple of years I started learning about electronics from nothing to be able to build my own MIDI controllers that would serve my needs , taste and be cheaper overall …
“Bring CRT displays and light pens into 21st century This project is about interfacing light pen from the 80s with modern operating system using USB HID. This is the result of my other research project: Lightpen support for Retro Pie …
“A couple months ago, I started a project on Tinker CAD, this would later become my fully working Button Box that I now regularly use in sim games and even for shortcuts in Fusion360. Up to my Tinker CAD project …