Content for 8x8 LED Matrix

Arduino Wedding Photo Booth - 3D Printed Parts, Automated and Low Budget

“I recently was invited to my partner’s brother’s wedding and they asked before if we could build them a photo booth as they cost too much to hire. This is what we came up with and after several …

Multi-Effects Internet Clock

“I have six red matrix LEDs in my warehouse, it seemed I bought them when I was a student about 15 years ago. It’s surprising that theyre still in good condition. Today I’d like to share how to …

ATmega Alien Themed Slot Machine

“This is a three-reeled slot machine with 25 symbols on each reel. The game is configurable. This project is my implementation of an alien themed slot machine using two ATmega328P-PU micro-controllers. I was inspired by Cory Potter’s Alien …

See-Through Matrix Clock

“A variant on the wooden wine box dual MX7219 matrix chiming clock. Rotating time, date, temp, humidity, day with events and chimes. In a previous project (matrix clock) most of the ‘guts’ for the code were done, but this continues …

Sunrise Alarm Clock

“Alarm clock with ramp-up light and music to get you out of bed on cold winter mornings A simple alarm clock build that wakes you up with both music and light. Each of the three alarms can be enabled for …

IOT Convertible LED Matrix Clock

“The starting idea for the project was to design a LED Matrix Alarm Clock that is made from off the shelf parts such as the MAX7219 - 4 in 1 LED Matrix, together with 3D Printed parts. This clock would use …

Chiming, Scrolling LED Matrix Clock

“Matrix clock with scrolling time, date, day of week, temp, humidity and event notifications. I wanted to build upon the clock logic I developed for the previous clock but put it into a more visible format. This clock is built …

Bolt IoT Notice Board

“We can use this notice boards at public places such as railway stations, bus terminus and inside buses for place indicators and in shops. INTRODUCTION: The main objective of the project is to control the notice board by using wireless …

Arduino Audio Meter

“The Arduino Audio Meter is a programmable guitar pedal that works with the Arduino UNO board. It is able to read the incoming audio signal and create effects on the four 8x8 LED matrices. The project is Open Source and …

4-Stroke Digital Clock With Arduino

“This digital clock driven by Arduino is a fun emulator of 4-stroke engine where the digits of hours & minutes represent the pistons moving. The “4-Stroke Digital Clock” driven by Arduino is a fun emulator of an internal combustion engine in …