Main Content

12V USB Charging Station

This project is an attempt to build a practical USB charging station that you can connect to your solar setup or car battery to allow the simultaneous charging of several USB devices, in my case for camping trips. The unit supports six high current USB ports and one cigarette lighter socket, for the late-night top-up of inflatable mattresses.
A display is included to keep an eye on the voltage and current and a 16A circuit breaker for protection against eager cigarette socket users. A pack of 18650’s also found its way into the box at the end of the project, because there was space, and can be handy a quick phone top-up if an external power source is not available.
Supplies:16 A Circuit Breaker (Qty: 1)
3S 18650 BMS (Qty: 1)
Dual 12V in 4.2A USB Charger Socket (Qty: 3)
XT60 Panel Mount Connector (Qty: 1)
Multi-function Panel Meter, 20A (Qty: 1)
Cigarette Lighter Socket (Qty: 1)
M3 Inserts (Qty: 4)
M2 x 6mm Screws (Qty: 2)
M3 x 10mm Hex Screws (Qty:4)”

Link to article