Other
“RoverBluetooth is the name I gave to the Arduino-based Bluetoothcar I made for my school exam when I was only thirteen. I also showed it at Maker Faire Rome with a FabLab (and I was one of the youngest there …
“With stepper motor via microstepping, digital motion processing, auto tuning via Twiddle Algorithmus, cascaded PID Controller I bought my first Arduino three years ago. I was fascinated by by the idea of a self-balancing-robot and this was my first project …
“An Arduino-based, self-balancing robot with MPU6050 and L293. I have made this robot on the basis of the instructions from Luka Gabric http://lukagabric.com/arduino-self-balancing-robot/. Because I use cheap chinese gear motors to drive there was a problem with …
“This guide will show you how to create a low-cost ($39) collision avoidance robot with a face on the font. We do this by using a new low-cost, bright OLED display. Our students love to add faces to their robots …
“Lots of line followers are available on the internet. Most of them are made using separate modules. Several single PCB designs are available but all three functionality like Bluetooth control, obstacle avoiding and line following is not available in a …
“Summary of the steps: 1. Install the ” Arduino Bluetooth RC Car” application using the link below: https://play.google.com/store/apps/details?id=brau… 2. Download the Arduino .ino code and the schematic 3. follow the schematic to solder …
“With this project, you can remotely control your car with Bluetooth. I wanted to check a car but I have different ways to try it remotely. I wanted to do with bluetooth after the necessary tools for this and after …
“This is a Smart Motor Driver (aka SAMI) designed to run a micro gearmotor, the objective of this board is to implement a PID control over this motors with the corresponding RPM feedback. All required components are already on board …
“Donkey Car featuring the Ultra96 board, a Raspberry Pi, FPGA accelerated stereo vision, MIPI CSI-2 image acquisition, a LiDAR sensor and AI. In this project, I will document the build of a Donkey Car enhanced with an advanced vision …
“The main purpose of this project was to build a robot that would differentiate itself from already existing robots, and that could be used in a real and innovative area. Based on personal experience, it was decided to build a …