Other
“TinyRemoteXL is a 12-button IR remote control based on an ATtiny13A powered by a CR2032 or LIR2032 coin cell battery. The basic hardware is similar to the 5-button TinyRemote. The main difference is that the ATtiny13 has to query 12 …
“A LED strip development multipurpose module Hello everyone, this is my first project here as well as my first intermediate Arduino project. Everything started when I bought the cheap LED strip a while back soon after soon I started getting …
“In our daily life, regular scheduled tasks can be boring. With help of ACR, those task can be easy & joyful. Inspiration During the covid-19 pandemic, we have learnt the ways of doing household tasks by ourselves. Not only that, the …
“In this Instructable, my twin brother, Sunyecz06, and I will show you how to make a 7-segment NeoPixel Clock with Countdown Timer. The inspiration for this project began with our parents and their fitness room. While they have an older …
“This project enables the user to control a Brushed DC Motor using an Infra-Red Remote Control, thus controlling speed, direction, and also brake of DC Motor is possible. It’s an Arduino compatible open-source hardware that helps you develop many …
“This Home Automation System is design to control the speed of fan to cool the light bulb and perform several different functions. This system is designed to control the speed of the fan to cool a light bulb. We decided …
“I finally got my hands on some IKEA FYRTUR motorized shades and wanted to control them using an IR remote. This is a niche application but I thought it might be useful for someone wanting to learn how to use …
“Intellisaurus is intended for many skill levels. The easy to follow instructions allow someone with a modest skill level to assemble the robot and have it walking in a matter of hours. There is no soldering or programming required to …
“Introduction Hello Everyone!This is my first guide and (hopefully) the first one in a series of guides on my quest to create an open-source RGB-LED visual poi. To keep it simple first, this is going to result in …
“An Arduino controlled glowing orb LED lamp with IR remote control. Fitting an Arduino Nano inside the snow globe turned into a messy, and not particularly good looking, job as it had to be mounted upside down inside the plug …