Other
“let’s make a little portable IOT weather station for under $20 using arduino and the blynk library! It uses the 433mhz transmitter so if you want you can use multiple clients like a LCD screen in your living room …
“Hello everyone! The purpose of this project was to make a robot capable of navigating around obstacles in a room using the ultrasonic module HC-SR04 mounted on a Servo, this allowed the robot to look around to determine the …
“Today I’m going to show you an introduction on home automation with RF signals. Imagine the middle of the winter, its cold and dark outside, but thanks to automation you wake up to a warm and bright room, with …
Project Lettuce For Life - Arduino 101 Based Automated Controller for Hydroponics, Aeroponics, Aquaponics, Etc. Intel Curie
“A device that can be used to control up to 4 different Hydroponic/Aeroponic Systems at once. The device will control the components of the system and will display notification to a LCD screen and allow the user to customize …
“IoT command center is a great weekend project to undertake, which you can use every morning before you head out to work/school. The IoT command center use the Particle Photonand recipes on https://ifttt.com/ to display data on …
“Plants in their growth stage need a photo period of 18 hours of light and 6 of darkness and at this stage a lamp white / blue light is needed, so we’ll use a fluorescent that will be only for …
“In this tutorial, I will walk you through the steps to build an easy and cheap IOT weather station. The retrieved data is pushed via a wifi shield to Thingspeak. The data can be analysed on the Thingspeak channel or …
“The idea of Building a community weather station using Open hardware Kicked a long back. We people from a local DIY community build this weather station. In our country we don’t give importance to weather data apart from the …
“In this instructable, I will show you how to construct a hydroponic greenhouse monitoring and control system. I will show you the components chose, a wiring diagram of how the circuit was constructed, and the Arduino sketch used to program …
“My wife and I were sitting together in my office recently and as usual the 3D Printer was churning away. Much to our surprise, and this has not happened before or since, the electronics stack started to smoke quite actively …