Other
“Hi, welcome in this instructable :) I am Nikodem Bartnik 18 years old maker from Poland. I made a lot of things, robots, devices through my 4 years of making. But this project is probably the biggest when it comes to …
“Summary: This Arduino based timer can switch one 220V light at dusk, dawn or specified time. Introduction: Some of the lights in my house are automatically switched on at dusk, until either a pre-set time or until dawn (all night …
“This is my first Instructable. Using Eagle, the board I designed is an AVR Programmer. The board combines the functions of 4 separate prototype boards I’ve built in the last few years: - A High Voltage AVR programmer, primarily used …
“Sensors like the TCS34725 from Adafruit can detect a single color. It stands to reason then, that if you were to aim this sensor at a multitude of points and record the resulting data, you could have a one-pixel camera …
“The The Rainbow Apparatus (a.k.a The Astral Chromascope) is an optical contraption that lets you see the colorful energy from ordinary things! In this Instructable, I will show you how to build your own to explore the technicolor …
“Monitoring accurately the temperature in your home is definitely one of the best way to save on your energy bill. At the same time you want to feel well in a warm home during winter time. My current thermostat only …
“The LED Cube is nothing but a 3-dimensional array of LEDs to light up in different forms and patterns. It’s an interesting project to learn or better your Soldering, Circuit Designing, 3D Printing, and Programming skills. Though I would …
“This fully 3D-printed clock is probably unlike any other digital clock you have seen. While in a regular LCD or LED-based digital clock the 7 segments for each of the four digits are switched on and off, the segments …
“This instructable was created in fulfillment of the project requirement of the Makecourse at the University of South Florida (www.makecourse.com). The goal of this project was to build a 3D printed prosthetic hand and control it using an …
““‘Antique’ Auto Correcting Analog Clock” is an analog styled clock I designed to resemble a clock owned by my grandmother many years ago. Her clock had a wooden case with brass hardware and inner workings. This clock has a 3D …