Other
“Connecting Raspberry Pico W to AWS IoT with micropython is not that hard if you know a few tricks. So lets connect them. When Raspberry Pi Pico W is released it became a new tool which can be used for …
“Simple to build one axis self stabilizing device witch consist only three components Arduino nano, Nem24 brushless motor, and MPU6050. This time I will show you how to make a simple One axis self balancing device, which is based on …
“Made a custom 3D Printed Thrmeometer from Scratch using TTGO T Display and DS18B20 Sensor. So this is the DIY Thermometer made entirely from scratch using a TTGO T display board and DS18B20 Temp sensor. A 3D Printed body is …
“This is an extension to my graphics libraries to plot filled quadrilaterals and triangles. It is designed for use with my colour TFT graphics library, Tiny TFT Graphics Library 2. With one minor change it can also be used with …
“For a while I’ve been watching PET bottles filament maker projects on YouTube. There are a lot of them, and I have to say, it is a very interesting project and I wanted to make one as well. So …
“In this project, we have designed an FM broadcasting transmitter system with a bandwidth of about 433MHz suitable for radio broadcasting. This is the simplest form of FM transmitter which has the capability of transferring broadcasted music or voice to …
“The nuclear physics research programme at the U.S. Department of Energy’s (DOE) Brookhaven National Laboratory is entering an exciting time. After completing its 22nd successful physics run, the Relativistic Heavy Ion Collider (RHIC), a DOE Office of Science …
“Made a Fume Extractor by using a custom Attiny13 Based Motor driver board and 3D Printed Body, Greetings. So here’s something COOL, a DIY Fume Extractor made completely from scratch. Its body is made up of 3D Printed parts …
“Handheld RPI4 based computer with 36-key tactile keyboard and display What is it? Glad you asked.. it’s a fully functional linux computer with: A Raspberry Pi 4 Custom 36-key keyboard with 5 way directional buton based around an Atmega328 …
“Two astrophotographers have teamed up to produce an out-of-this-world photo of the moon, capturing over 200,000 shots to create a single image. Andrew McCarthy and Connor Matherne collaborated last November to push their photography skills to the limit. Their …