Content for Project

A Tiny Compass With ATtiny85

“This is our first project with ATtiny85; a simple pocket digital compass (in collaboration with J. Arturo Espejel Báez). ATtiny85 is a high performance and low power microcontroller. It has 8 Kbytes of programmable flash memory. Due to this, the …

AI Thermometer

“AI device for mass fever screening. Hi Everyone! I want to share with you an AI Fever Screening Thermometer, a device I’ve been working on during past two months. I combine Thermal (IR) and Visible Spectrum (RGB) cameras in …

Arduino-Tamagotchi Project (I Am the Tamagotchi)

“I was bored in quarantine and decided to make an Arduino Tamagotchi. Because I hate a lot of animals I choose myself as the Tamagotchi. First I build my console on a breadboard. The wiring is very simple. There are …

Automated Plant Pot - Little Garden

“Looking around for idea’s, I decided to make something usefull for my mother who loves growing plants and began working on an automated plant pot. The main tasks for this automated plant pot, Little Garden, are to: Measure the …

Autonomously Landing a Lunar Lander with an Xbox Controller Robotic Arm - Part 1

“Creating an Xbox Robot Arm is something that I’ve been wanting to do ever since I saw the post by Kevin Drouglazet who was able to utilize an Xbox Controller with an arm he created and was so friendly …

AVRgpp ISP and UPDI programmer

“The AVRgpp (General Purpose Programmer) is open source hardware and software designed for use with the Arduino IDE. It provides the following functions in a single unit: an ISP programmer, a UPDI programmer (with or without a 12V programming pulse …

Big Arduino LCD Clock With Two Alarms and Temperature Monitor Controlled by IR TV Remote

“How to build an Arduino based LCD Clock with Two alarms and temperature monitor controlled by IR TV remote. This is an LCD clock made with DS3231 real time clock module, which unlike DS1307 has the possibility of Alarm and …

Boat Ventilator Control

“Controlling a fan in my boat on the cheap; with an ATTiny85 (DigiSpark) and a DHT11 temperature and humidity sensor A Small controller based on a Digispark ATTiny controller I had on my shelf and a spare DHT11 combined temperature …

Component Tester in a Keychain

“Being an electronics engineer, I always wanted to have a portable component tester, which could test every electronic component out there. In 2016, I built myself a Component Tester based on AVR TransistorTester by Markus F. and Karl-Heinz Kübbeler. This …

Contactless Water Fountain

“I was looking for a project that would check all the requirements set by my teachers and at the same time be fun for me to make. When looking for a subject I couldn’t help but feel inspired by …